SJ-700 series Jetstream high shear mixing emulsifier (pressure resistant type)

Selection Table for Intermittent Flow Control Disperser Mixer

——Elastic connection between motor and transmission shaft

——Standard flange machine base

——Detachable stator/rotor

——Transmission shaft can be extended in design

——Mechanical seal design, suitable for vacuum and pressurized working conditions

——Working temperature: ≤ 180 ℃

——Large processing capacity can reach 18000L/batch

Technical Data Parameter Table

Note:The processing capacity limit in the table is the data measured when the medium is "water".

If the viscosity or consistency of the medium is high, it is recommended to use it in conjunction with a pipeline type high shear dispersing emulsifier

If there are working conditions such as high temperature, high pressure, flammability, explosiveness, corrosiveness, etc., it is necessary to provide accurate parameters for further selection and customization.

The correct parameters are based on the provided physical object. If there are any changes to the data, please do not notify us separately.

Introduction to the working principle of SJ series high shear mixing emulsifier

The SJ series high shear mixing and dispersing emulsifier is widely used by users due to its six significant features of high-speed mixing, dispersion, rapid refinement, dissolution, homogenization, and emulsification. Mechanical and hydraulic high-speed shear force is the key to the success of the SJ series. The high-speed rotating rotor and stator are precisely matched, generating high shear line velocity and high-frequency mechanical effects, which bring about mechanical and hydraulic shear forces, ensuring that materials can withstand hundreds of thousands of shear cuts per minute. When the material is exhausted, the precision gap between the rotor and stator is subjected to strong centrifugal compression, shear, spray, liquid layer friction, collision, tearing refinement, and complex liquid flows such as turbulence, turbulence, and eddy currents. Under the joint action of corresponding mature process conditions, immiscible liquid phase, liquid gas phase, and liquid solid phase are instantly uniformly and finely mixed, dispersed, refined, and emulsified. This cycle repeats to obtain high-quality products.

The high-speed rotor and tightly matched stator generate centrifugal force, which sucks materials into the stator chamber from the lower or upper lower parts.

The rotor brings the material into the stator gap, and the material is subjected to centrifugal compression. When it passes through the stator head (long length L, mesh or circular hole), it produces a violent spray and withstands strong mechanical or hydraulic shear. At the same time, new material is continuously brought into the stator cavity at the center of the rotor, forming cyclic shear.

The material sprayed from all directions rebounds after hitting the groove wall, forming phenomena such as circulating logistics, turbulence, and turbulence. The liquid layer rubs, collides, tears, and refines, ultimately completing the process of mixing, dispersing, refining, and homogenization.