SW-180S Reinforcement Position Detector

Brief introduction
This product can determine the position and spacing of steel bars, detect the thickness of concrete protective layer with known diameter, detect the diameter of steel bars and the thickness of concrete protective layer with unknown diameter, display the real-time distribution of steel bar grid (steel bar grid distribution image display), and also detect the position of magnetic and conductive bodies in non-magnetic and non-conductive media. It is an intelligent portable non-destructive testing device that integrates automatic detection, data storage, and output functions.
2、 Product Features
1. Check the position, spacing, diameter, and protective layer thickness of the steel bars
2. Multiple steel bar positioning methods, including alarm sound prompts, indicator bar prompts, signal value prompts, etc
3. Sensitive detection and high detection accuracy
4. It can display real-time images of steel mesh distribution and perform both planar and cross-sectional scans of steel distribution
5. RS232 and USB interfaces
6. Data transmission analysis software, powerful and easy to operate
3、 Technical indicators
1. Steel bar diameter adaptation range: Ø 6mm to Ø 50mm
2. The commonly used grades for steel bar diameter are Ф6，Ф8，Ф10，Ф12, Ф14, Ф16, Ф18, Ф20, Ф22, Ф25, Ф28, Ф32, Ф36，Ф40, Ф50。
3. Diameter nominal range: Ø 6mm to Ø 32mm
4. Maximum allowable error of steel bar diameter indication: error ± 1 level
5. Data storage capacity: 120000 pieces of detection data
6. Work environment requirements: Environmental temperature: -10 ℃ to+40 ℃; Relative humidity:<90RH; Electromagnetic interference: No strong alternating electromagnetic field. Long term direct sunlight is not allowed
7. Battery: 6 LR6 (alkaline) batteries with a power supply time of more than 32 hours
8. Volume and weight: Host volume: 185mm × 180mm × 85mm Instrument weight: 400g; Probe volume: 110mm × 55mm × 28mm; Probe weight: 245; Probe weight: 245g Car volume: 128mm × 100mm
4、 Product Features
1. Check the position and direction of steel bars in reinforced concrete structures;
2. Given the diameter, measure the thickness of the protective layer of the steel reinforcement;
3. Unknown diameter, check the diameter of the steel bar and the thickness of the protective layer
4. Grid display of steel bar distribution
5. Display of steel bar profile dot matrix distribution
6. Probe self calibration function
7. Automatic locking function for protective layer thickness and steel bar diameter
8. Storage and query functions for detection data
9. Data transmission and processing functions