SW-CRY on-site heat transfer coefficient detector for building maintenance structures

Brief introduction
This product is used for on-site testing of heat transfer coefficient and thermal resistance data of building envelope structures.
2、 Technical indicators
1. Heat flux measurement: Channel: 2 channels, used for measuring heat flux density of building envelope structures. Maximum error:+(0.05% reading+3 words).
2. Temperature measurement: (8 channels) Channel: 8 channels, of which 3 channels are used for measuring the surface temperature inside the building envelope structure; 3 channels are used for measuring the external surface temperature of building envelope structures; 1 channel is used for indoor air temperature measurement; 1 channel is used for outdoor air temperature measurement. Resolution: 0.0026 ℃. Maximum error: 0.09 ℃ (less than 0.1 ℃).
3. Powered by a 3.6V high-energy lithium battery.
4. Sampling period: 3600 seconds.
5. Record data: capable of continuous measurement for 18 days
6. Data communication: Can communicate with computer RS-232 port and USB interface.
7. Software environment: Windows 2000 or Windows XP operating system. Powerful data transmission and analysis software
3、 Basic configuration
1. SW-CRY building maintenance structure heat transfer coefficient detector host 1 unit
2. 10 sets of precision sensors
3. One disk of calculation and analysis software for heat transfer coefficient detector
4. One instruction manual, one warranty card, and one certificate of conformity each
5. One aluminum alloy portable case