SZSW8220-100W Explosion proof LED Flood Light Explosion proof Energy saving Lamp

SZSW8220-100W Explosion proof LED Flood Light Explosion proof Energy saving Lamp

SZSW8220-100W Explosion proof LED Flood Light Explosion proof Energy saving LampProduct Features:
1Select high-quality chips with excellent light maintenance rate and high light efficiency;
2Adopting surface mount technology to significantly improve thermal conductivity;
3Carefully designed honeycomb shaped light distribution structure to effectively improve the efficiency of lighting fixtures;
4Adopting constant current drive, with short-circuit and overvoltage protection functions;
5TheEAType can be used as normal working lighting and has emergency functions;EBThe type is purely used as emergency lighting and is usually turned off,ATheBThe type can immediately start emergency lighting when the main power is cut off, and can also be used for external switch control to start at any time during the main power outage.
6It has excellent electromagnetic compatibility and will not cause any interference to other electrical appliances or transmission networks. The power supply itself has excellent electromagnetic resistance力；
7Has electromagnetic compatibility and tolerance20%Voltage fluctuations;
8The driving power supply adopts sealing technology to ensure that the components are not corroded;
9Carefully design a three cavity independent structure to ensure stable operation of all electronic components;
10AdoptingIICExplosion proof structure, andIP66Protection level, with excellent explosion-proof protection performance;
11Adopting a side cavity open cover connection method, it is convenient for users to wire and maintain, and multiple installation methods are available for users to choose from.

1.The components of explosion-proof lamps should be made of materials that have sufficient resistance to chemical, mechanical, and battery medium corrosion.
2.The shell and protective net should be made of metal materials that will not produce dangerous sparks due to impact and falling, or covered with safety materials.
3.The distance between the transparent component and the light bulb, and the power of the light bulb is less than3WWhen, it must not be less than3mmThe power shall not be less than3WWhen, it must not be less than5mm.
4.The distance between transparent parts and protective nets shall not be less than5mmThe mesh area shall not exceed2000mm2.
5.The introduction cable of the lamp is clamped and applied15kgThe tension cable of the force shall not be pulled off.

LEDSuggestions for installation height of explosion-proof lamps
1.The design height of factory buildings and workshops varies depending on the actual production situation, and the actual installation height of lighting fixtures depends on the height of the factory building but is not equal to it. For example, the actual design height of a factory building is8Rice, then we also need to calculate the net space between the top of the factory building and the home where the lighting fixtures are installed, for example, the net space is2The installation height of the light fixture is6Therefore, when choosing explosion-proof lamps, it is important to note that the installation height of the lamps may not necessarily be the design height of the factory building.
LEDexplosion-proof lamp30WRecommended installation height:3mInstallation spacing:5m
LEDexplosion-proof lamp40WRecommended installation height:4mInstallation spacing:7m
LEDexplosion-proof lamp50WRecommended installation height:5mInstallation spacing:9m
LEDexplosion-proof lamp60WRecommended installation height:6mInstallation spacing:11-13m
3rice~5Rice Factory Building --40W~50WLEDexplosion-proof lamp
5rice~7Rice Factory Building --50W~100WLEDexplosion-proof lamp
7rice~9Rice Factory Building --100W~150WLEDexplosion-proof lamp
9rice~15Rice Factory Building --150W~200WLEDexplosion-proof lamp

Technical Specifications:

Execution standard:GB3836.1，GB3836.2，GB12476.1

Scope of application:1District2DistrictIIAIIBIICClass,T1-T6

Rated voltageAC220V AC/DC12~36V

Equipped with light source:LED（80WThe100WThe120W）

Power factor:0.95

Cable specifications:Φ10-Φ14mm

Explosion proof mark:ExdeⅡCT6 Gb

Protection level:IP66

Anti corrosion grade:WF2

Applicable height: 3-8M