Siemens electric temperature control valve

Siemens electric temperature control valveIt mainly consists of a controller, actuator, valve body, sensor, and electrical control box.

1. Controller, receives temperature signals, performs P/PI/PID calculations, and outputs control signals.

2. The actuator receives the adjustment signal sent by the controller, adjusts the valve opening, and runs stably. It can choose power-off reset, 3P or analog adjustment, 230AC or 24AC power supply.

3. The valve body, the actuator that regulates the flow rate of the medium, is combined with the actuator to form an electric control valve.

4. Sensors, measuring medium temperature, with a complete range of types. According to the installation location, it can be divided into various types such as immersion temperature sensors, bundled temperature sensors, duct temperature sensors, indoor temperature sensors, outdoor temperature sensors, etc.

5. Electric control box, built-in transformer, switch and other accessories.

Siemens electric temperature control valvePerformance advantages:

1. Different on-site operating conditions can flexibly adjust control parameters to make the system more efficient.

2. Through calculus calculations, predict temperature trends in advance and control temperature accurately.

3. The controller can read the current temperature value and observe the working status of the valve.

4. Scalable functions such as temperature compensation, remote settings, day night and winter summer conversion, maximum priority, cascade control, over temperature alarm, remote communication, central monitoring, etc., energy-saving and safe.

5. Users can choose the circuit breaker protection function according to their requirements, and the valve will automatically close when there is a power outage.

6. Realize various intelligent energy-saving operation modes, unmanned operation, and high cost-effectiveness.

Application Fields

1. Heating system heat exchanger or heat exchange unit

2. Domestic hot water system

3. Air conditioning water/air system

4. Thermal temperature control for production process