Silicone rubber heating plate (temperature equalization technology)

Introduction to Silicone Rubber Heating Plate (Temperature Equalization Technology)

The uniform temperature heating plate (silicone rubber heating plate) is a thin surface heating element with unparalleled flexibility compared to traditional metal heaters.

Composed of two thin sheets compressed by sandwiching silicone between the upper and lower layers of fiberglass cloth.

Due to its thin sheet shape, it has good heat transfer properties (standard thickness of 1.5mm).

It has flexibility, so the heated object can be completely in close contact, such as curved cylinders.

The general planar heating element is composed of carbon, while the heating element of the silicone heater is arranged nickel chromium alloy resistance wire, so it can be used with peace of mind.

Characteristics of silicone rubber heating plate (temperature equalization technology)

1. The shape of the uniform heating plate can be freely made.

Unlike typical carbon based heaters, silicone heaters have a shape composed of nickel alloy resistors, which can be freely processed into circular, triangular, and other shapes according to the shape of the object being heated.

It can be processed in a short period of time (one piece is also acceptable).

2. It can be designed according to the requirements.

This product can be used for various industries and devices.

Due to its thin sheet shape and softness, it can achieve lightweight and miniaturization when used in other products. The residual product heats up quickly; And temperature control is not possible, so temperature adjustment is required.

3. The ordinary type, E type, and MG type can be used semi permanently at 200 ℃.

• Can adhere to heated objects

Below 100 ℃, there are two adhesive tapes on both sides

When the temperature is below 100 ℃~150 ℃, silicone gel (RTV)

4. The highest temperature of H-type can reach 300 ℃.

300 heat-resistant adhesive can be used, and our company has KE3418RTV (B) Xinyue Chemical Agent.

Silicone rubber heating plate (temperature equalization technology) model

Standard Type of Uniform Heating Plate

Power densityUsually 0.6 to 0.8 w/cm2

However, significant changes may occur due to variations in the installation status and temperature control methods of the heater. Please confirm when selecting.

Technical Specifications

Heat resistance temperature

Continuous use temperature: 200 ℃

Maximum temperature: 250 ℃

Electrical Characteristics

Power tolerance: ± 10%

Insulation resistance: 100M Ω

Voltage endurance: 1500V (50HZ)/1min

size

Maximum: 800mm * 3000mm

Minimum: 25mm * 50mm

Thickness: 1.5mm

Equal temperature heating plate E-type Etching Type

The traditional uniform temperature heating plate (silicone rubber heating plate) uses nickel alloy circular wires. Our company uses nickel alloy foil for etching processing, which enables precise shaping and mass production.

High power density, capable of rapid heating (3-5 w/cm2).

The temperature distribution of the heating surface can be changed, and due to the use of spiral wire processing, the temperature can be made uniform (± 3 ℃)

Power density

Due to differences in the installation status and temperature control methods of 1-5W/cm2 heaters, their power density can vary greatly.

Technical Specifications

Heat resistance temperature

Continuous use temperature: 200 ℃

Maximum temperature: 250 ℃

Electrical Characteristics

Power tolerance: ± 10%

Insulation resistance: 100M Ω

Voltage endurance: 1500V (50HZ)/1min

Silicone rubber heating plate (temperature equalization technology)Project Case

General Medical - Precision Medical Equipment Fuzhou Sika - Laboratory Instruments Danteng Air - Communication Room Battery Board