Single bag filter equipment

Single bag filter equipment is a design that can be matched with any feeding port connection direction. The simple structure makes cleaning the filter easier. Improve the application of filters in various industries by minimizing blind spots. The single sealing ring design of the filter provides a good sealing effect. The three-point filter bag pressure plate ensures transparent sealing of the filter bag during operation. Ensure consistent usage over the years.

　　Single bag filter equipmentIt has many advantages such as simple structure, rationality, good sealing, strong circulation capacity, and easy operation. Especially the probability of side leakage of the filter bag is small, which can accurately ensure the filtration accuracy and quickly replace the filter bag. The inner and outer surfaces of the filter are treated with mechanical sandblasting and polishing, which is uniform and easy to clean. Stainless steel filters can also be provided in the form of heating sleeves, adjustable support legs or hooks according to customer requirements to meet the needs of different customers.

Technical Specifications:

Maximum flow rate: 10-45m3/h

Filter area: 0.1-0.25m2

Filtering accuracy: 0.3-600um

Material selection: 304 stainless steel, 316 stainless steel, 316L stainless steel

Work pressure: 0.1Mpa

　　Single bag filter equipmentEasy to operate, simply install the filter bag of the required fineness level inside the filter cartridge, check if the O-ring seal is intact, and then tighten the ring bolt of the filter cartridge cover to put it into operation. After the pump is started, the pressure gauge on the filter slightly rises, with an initial pressure of about 0.05MPa. As the usage time increases, the amount of filter residue in the cylinder gradually increases. When the pressure reaches 0.3MPa-0.6MPa, the machine should be stopped and the exhaust should be opened to check the residue left in the filter bag. The filter bag can be replaced and continued to be used (the filter bag can generally be reused after cleaning). The filter pressure is generally adjusted to 0.1-0.6MPa, which is more suitable. If the filtration pressure is too high, it will damage the filter bag and protective net, and special attention should be paid. Main uses: paint, beer, vegetable oil, medicine, chemical drugs, petroleum products, textile chemicals, photosensitive chemicals, electroplating solution, milk, mineral water, hot solvents, latex, industrial water, sugar water, resin, ink, industrial wastewater, fruit juice, edible oil, wax, etc.