Slaughter Grille Machine, Food Factory Dredging Machine, Grille Cleaning Machine

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The grille cleaning machine is assembled into a set of * teeth factory by a rotating barbecue chain. The rotational motion of the flow direction of the toothed chain driven by the motor reducer. The upper part of the transport chain rake teeth of the device is self-cleaning due to the gravity between the relative movements of each tooth caused by the guide groove wheel and curved track, resulting in the vast majority of solid materials. The other part relies on the anti movement of cleaning debris getting stuck in clean teeth. Based on the flow direction, the gear chain is similar to a grille, and the front angle chain shaft component on the tooth gap can be selected under usage conditions. When the teeth of suspended particles separate in the fluid, smooth flow can be ensured. The entire work process is continuous and can

Product Details

The principle of grid machine:

Grille cleaning machineIt is mainly composed of a driving device, a frame, a spindle, a grid, a slag plate, a plate brush, a circular brush, and a traction chain. Under the drive of the motor, after being reduced by the reducer, the sprocket and chain are driven to move and fixed in placerotary grilleThe plate brush on the rotating chain moves along the mesh surface from bottom to top, cleaning the mesh surface and taking away dirt. When the dirt is sent to the top, most of it falls to the slag hopper by gravity, and a small amount of dirt attached to the plate brush is removed by the rotating circular brush, completing the cleaning process. The liquid flows through the gap of the mesh, and the entire working state continues to circulate. A rotating barbecue chain is assembled into a set of transmission rake teeth chains. The rotational motion of the flow direction of the toothed chain driven by the motor reducer. The upper part of the transport chain rake teeth of the device is self-cleaning due to the gravity between the relative movements of each tooth caused by the guide groove wheel and curved track, resulting in the vast majority of solid materials. The other part relies on the anti movement of cleaning debris getting stuck in clean teeth.

Grille cleaning machineFeatures:

1. The grid cleaning machine has a high degree of automation and separation efficiency, ensuring continuous and stable operation even without human supervision

2. Grille cleaning machine has low power consumption, no noise, and good corrosion resistance

3. The grille cleaning body is equipped with a mechanical overload protection device. In the event of equipment failure, the shear pin can be cut off to prevent the equipment from working under overload and damaging its components.

4. The grid cleaning machine can adjust the operating interval of the equipment arbitrarily to achieve periodic operation;

5. The grille cleaning machine can be used according torotary grilleStart stop of automatic control equipment for front and rear liquid level difference; And it has manual control function for easy maintenance.