Smoke hood type oil fume purification integrated machine

The products produced by our companySmoke hood type oil fume purification integrated machineDesigned as a mechanical and electrostatic integrated system, with a two-stage oil fume purification method. The first stage is mechanical purification, which uses centrifugal oil fume separation to sprinkle oil particles onto high-efficiency activated carbon fibers, which are then adsorbed and filtered through high-efficiency activated carbon fibers. The second stage is electrostatic purification, which uses the most advanced high-voltage power supply and combines DC superimposed pulse plasma power supply box tooth plate structure electric field to generate corona discharge and obtain high-energy plasma. Under the action of plasma electric field, kitchen oil fume instantly condenses small oil droplets into large oil droplets, which are absorbed on the oil collection plate and settle into the oil collection tank under the bombardment of plasma. At the same time, most of the oil fume exhaust gasµmGrade oil mist particlesVOCOrganic substances, as well as various odors such as burnt and spicy flavors, are degraded by plasma to ensureOil fume purifierHigher purification rate, odor degradation rate, and longer cleaning cycle.

This product has met the oil fume emission standards of the State Environmental Protection Administration（GB18483-2001）The requirements of the "Emission Standards for Cooking Fumes in the Catering Industry" have led the way in various performance indicators in China, fundamentally solving the problem of privacy and kitchen fume pollution.

IIProduct Features

1Efficient: The purification efficiency meets the technical requirements and testing standards for cooking fume purification equipment in the catering industryHJ/62-2001

2Safety: Equipment and pipelines are free from oil stains, eliminating fire hazards.

3Environmental Protection: Activated carbon filter cotton should be replaced in a timely manner, and the electrode plate electric field should be cleaned regularly to ensure consistent purification effect.

4Savings: Integrated design saves space and has low operating costs.

IIISelection principle:

According to the selection of stove eyes, the air volume processed by each stove eye is2000m³/h,The air volume of the selected equipment is the number of stove eyes*2000m³/hThen determine the number of equipment models based on the total air volume.

4Equipment installation and main issues

1This device is installed indoors and is strictly prohibited from being used outdoors

2The power connection should be operated by qualified electricians and reliably grounded, with a resistance of less than2Ohm, the node wire (marked in yellow and green) is in good contact with the shell.

3The voltage should match the fan≤6000The power supply used for air volume is220v,>6000The power supply used for air volume is

380v.

4Each device should be equipped with a motor protection device and a leakage protection device.

5The back of the equipment should be installed against the wall and secured with expansion screws.

6Install a lifting device on the roof to ensure that the equipment is securely installed and level as a whole.

5Configuration of air ducts:

Users can configure and design the size of the flue according to the construction layout of the kitchen site.

VICorrect use:

1Before using this product, check if the power supply matches

2Power on: First, connect the main power supply, the red power indicator light will turn on, and the hood will be in standby mode. When running, press the green start button on the hood and the green indicator light will be on. At this time, the hood fan and oil fume separator will all rotate and run as a whole. Normal operation waiting3After minutes, restart the stove.

3Shutdown: First, turn off the stove. When there is no smoke, press the red button on the hood to stop the entire operation. Finally, disconnect the main power supply.

7maintenance

When the exhaust volume of the fan is found to be insufficient during use, it indicates that the activated carbon filter cotton has been saturated and should be replaced in a timely manner. When replacing, first turn off the main power, then remove the fixing screws of the oil fume separator, take out the fixed net of the activated carbon filter cotton, remove the old activated carbon filter cotton, replace it with a new one, and check if the screws are tightened after installation.