Solar multi parameter water quality detector

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The solar multi parameter water quality detector adopts the method of extracting water samples to automatically and continuously detect water quality parameters. The water quality sensor is built into the sample pool, and the water sample enters the sample pool through multi-stage filtration. The product adopts a low-power design and can achieve continuous online monitoring of water quality with only 60W or more solar panels. It has the advantages of small footprint, easy installation, long lifespan, and maintenance free, and is widely used in unmanned water quality automatic monitoring scenarios such as surface water, reservoirs, groundwater, discharge outlets, and rainwater and sewage pipelines.

Product Details

1Solar multi parameter water quality detectorIntroduction

Solar multi parameter water quality detectorCan continuously monitor residual chlorine, turbiditypHTheORPConductivityTDSColor, water temperature, etc8 Types of parameters. The use of consumable free and membrane free water quality sensors or analyzers extends their service life and reduces maintenance workload. Low import pressure, low water consumption, and can work intermittently. It has the advantages of high detection accuracy, easy installation, and easy maintenance, and is suitable for

Online monitoring of water quality for water supply pump rooms, water supply network terminals, direct drinking water, and rural drinking water.

2、 Product Features

Low power design, directly powered by solar energy

Compact chassis design, occupying only 0.15 square meters of space

• Flexible selection of various installation methods such as floor standing, wall hanging, and pole standing

Regular automatic drainage, built-in sample tank, low maintenance workload

Up to 6 digital water quality sensors, with flexible combination of detection parameters

• Factory pre calibration, can restore factory calibration parameters at any time

The detection data is reported to the IoT platform via RS485 or 4G

3、 Product parameters

Water quality parameters (optional)	COD、 Ammonia nitrogen, nitrate nitrogen, nitrite nitrogen, chromaticity, transparency, conductivity TDS、 Salinity pH, turbidity, dissolved oxygen ORP、 Chlorophyll, blue-green algae, etcMore than 30 parameters are available for selection.
Other parameters (optional)	Water level, flow rate, flow velocity, meteorological parameters, etc
Camera (optional)	External serial port camera captures on-site images
Sampling and water sample treatment	Built in water pump extracts water sample, secondary filtration+static sedimentation
inspection cycle	5min~60minCan be set between them, default is30min；
SIM card	IoT card
contact method	1) 2G/4G communication, up to 4 data platforms can be reported simultaneously 2) RS485 communication, using Modbus RTU protocol
Working temperature range	-20℃-60℃
power supply method	solar energy
Protection level	IP55
material	powder-coated carbon steel
Mechanical dimensions	450mm in length）×350mm (width)）×850mm (height)