-
E-mail
maning355@163.com
-
Phone
13582386989
-
Address
East side of No. 17-1 Nanyang Industrial Zone, Anguo City
Product Categories
Hebei Angtong Pump Industry Co., Ltd
Spot supply of filter press feeding pump
NegotiableUpdate on 02/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The feed pump of the filter press is available in stock, and the pump body and overcurrent components are made of high chromium alloy, rubber lining or ceramic material, which is suitable for strong wear and highly corrosive media (such as slurry, acid alkali slurry). Double blade wheel structure or wide channel design to avoid particle blockage, reduce vibration and noise.
Product Details
Spot supply of filter press feeding pumpThe working principle of is mainly based on fluid dynamics and physics principles. The specific process is as follows:
Inhalation: When the pump is started, the prime mover (such as an electric motor) transmits rotational motion to the impeller through belt drive or coupling drive. During the rotation of the impeller, a low-pressure zone is formed at its center, while a high-pressure zone is formed at the periphery. This pressure difference causes the mixed liquid to be sucked into the impeller.
Acceleration: During the rotation of the impeller, a forward and downward force is applied to the mixed liquid, causing the speed of the mixed liquid to rapidly increase.
Cutting and stirring: The structural design of the impeller ensures that the mixed liquid is cut and stirred by the blades of the impeller when passing through it. This helps to cut the solid particles in the mixed liquid into smaller particles and distribute them evenly.
Discharge: Through the action of the impeller, the solid particles in the mixed liquid are cut and stirred before being pushed towards the outlet of the pump, thereby achieving the transportation of the mixed liquid.
Spot supply of filter press feeding pumpPrecautions for use
Installation and Debugging
The pump body should be installed horizontally, with the inlet and outlet aligned with the filter press pipeline to avoid cavitation and resistance loss.
Fill with liquid and eliminate air before starting.
operation monitoring
Regularly check the motor current, bearing temperature, and seal leakage.
Avoid prolonged no-load or overpressure operation.
maintenance
Regularly replace worn parts (such as impellers and sealing rings) and clean filters.
Add lubricating grease or oil to the lubrication parts according to the instructions.
Material adaptability
Do not transport large particles (>impeller passage gap) or fibrous impurities to prevent blockage.
Pumps with corresponding materials should be selected for corrosive media.
