Spray line filter element filtration spray chamber

The plastic powder recycling machine is based on the principle of aerodynamics. Using an external exhaust system to dissipate scattered dust into the filter element This product is simple and practical. Improved the physical and mental health of workers, and also increased work efficiency.Spray line filter element filtration spray chamber

Adopting high-strength imported maintenance xx filter element filtration, powder and gas separation, reverse blowing device, automatic timed powder cleaning, automatic reverse blowing for recycling, easy cleaning, fast color change, simple and convenient. The powder recovery rate is greater than 98%. 2、 Main technical parameters: Exhaust volume: 6468 ㎡/h Rated power: 7.5kw Noise: ≤ 8 (DB) Filter element: 9 Filter elements The number of filter elements is selected according to user needs, and the exhaust volume varies accordingly,

The powder containing air in the powder room of the plastic powder recycling machine is attracted by the recycling machine and enters the recycling system through the side inlet. Under the action of the airflow, the dust containing air passes evenly through the micro mesh filter cartridge, while the fine dust powder is trapped on the outer surface of the filter cartridge As the dust layer on the surface of the filter cartridge thickens and the resistance increases, the control system timer will act on the solenoid valve system to open the air diaphragm valve. High pressure airflow will then directly rush into the center of the filter cartridge, and the powder on the surface of the solenoid valve will act on the airflow from the inside out, blowing away the dust adsorbed on the surface of the filter cartridge. The dust in the powder hopper will fall due to the downward movement of the main airflow and gravity.

The plastic powder recycling machine can further purify the discharged air, ultimately achieving the goal of purifying the discharged air, optimizing the working environment, improving economic efficiency, and achieving a recycling utilization rate of up to 98%

Secondary plastic powder recycling equipment for assembly line production1. Generally, 1.5mm cold-rolled steel plates and section steel materials are used indoors.Spray line filter element filtration spray chamber

2. Using bending seam welding to make the outdoor body panels more tightly connected to each other.

3. The interior surface of the room is flat and smooth, and high-quality sealant is injected into the joints between the boards, making it easy to clean powder and change colors.

4. The top of the room is flat to reduce the opening area, prevent dust from overflowing, and protect the hanging fixtures.

5. The recycling adopts the technology of large wind outlet and side suction, with stable and reasonable airflow in the spray room, gentle wind force, and increased powder retention time in the air to improve powder loading rate.

6. Each operating port is equipped with independent top explosion-proof lighting, which provides sufficient internal illumination, is safe, energy-saving, and easy to maintain.

7. The distance between the perimeter of the workpiece entrance and exit opening and the workpiece can be adjusted