Spray screen printing oven

Product FeaturesPRODUCT FEATURES

Spray screen printing oven is suitable for various types of plastic shell screen printing, plastic part screen printing, glass printing, Alex board printing and other screen printing industrieshigh-temperature ovenHeating the product through hot air circulation accelerates the curing and firmness of the silk screen product.

Temperature range: Room temperature -250 ℃, adjustable at any time

Temperature control: Using an intelligent PID self-tuning temperature controller with a control accuracy of ± 1 ℃, coupled with SSR solid-state relay output, it can accurately control the temperature inside the oven, making the temperature uniformity inside the oven ± 3 ℃ (no-load test)

Baking methods: layered baking, trolley baking

Appearance structure: Front double door type, with a trolley guide rail (ground treatment) set at the bottom of the inner tank, and an electric control box placed on the right side for easy operation.

Protection devices: Overtemperature alarm, power outage, leakage protection, alarm upon arrival, motor overload protection, phase sequence protection, control circuit fuse, non fuse switch and other electrical accessories. There is an explosion-proof door on the back of the oven box.

Air circulation system: The furnace circulates air left and right, preserves heat energy, maintains uniform temperature, saves energy and time, has high efficiency, is easy to operate, automatically maintains a constant temperature, and performs timed baking.

Heating system: stainless steel heat sink heating tube, heating power: 12KW, total power: 13.5KW

Product advantages: uniform temperature, multiple protections, high efficiency and energy saving, environmental protection and safety

Product parametersPRODUCT PARAMETERS

1. Temperature range: normal temperature -250 ℃, adjustable constant temperature

2. Size: Non standard customization

3. Heating rate: Raise from room temperature to 200 ℃ in about 30 minutes

4. Thermal insulation performance: The outer wall temperature does not exceed 45 ℃ (when the furnace temperature reaches 200 ℃)

5. Temperature control accuracy: ± 2 ℃

6. Temperature uniformity: ± 3 ℃%

7. Power supply: 380V/50HZ (three-phase five wire)

Optional components

OPTIONAL COMPONENT