Squirrel cage crusher, hammer shredder, fruit food crusher

The squirrel cage crusher is suitable for crushing materials such as fruits. The material enters the crushing area and rotates with the scraper on the rotor. Due to the installation of a blade row, the material is crushed during this process. After reaching a certain particle size, it is discharged from the waist or circular hole on the stator and then pumped into the next process by a screw pump. The double-sided teeth of the blade can be used interchangeably.

Working principle: The material enters the hopper and is roughly crushed by the spiral feeding sleeve before entering the crushing chamber. Under the action of centrifugal force, the material rotates with the scraper on the rotor. Due to the blade row on the stator, the material is crushed during this process and reaches a certain particle size. It is discharged from the waist or circular discharge hole on the stator and sent to the next process by a separate single screw pump.

Characteristics of squirrel cage crusher

The entire body is made of stainless steel material, which has a longer service life when exposed to acidic juice.

2. Ultra long spiral pushing squeezing rod, ultra-high juice yield, and excess production.

3. Use a 0.6mm filter mesh with a fine and free of particles and impurities in the juice.

4. Large scale matching crushers can be customized, with high efficiency and energy saving.

IIRat cage crusherThe operational process

1. Preparation work: Check whether the various components of the crusher are intact, clean up residual materials and debris, and prepare the materials that need to be crushed.

2. Adjust parameters: Set the crusher's speed, number of hammer heads, and discharge port size according to the materials to be crushed and the crushing requirements.

3. Start the crusher: Press the start button to start the crusher. During the crushing process, it is necessary to monitor the crushing effect and discharge situation of the material, adjust the parameters in a timely manner to ensure the crushing effect.

4. Collect materials: After the crusher is completed, collect the crushed materials to the required location.

Maintenance plan for hammer shredder, radish shredder, and crusher

1. Daily maintenance: The crusher needs to be cleaned and lubricated regularly to ensure its normal operation. Especially vulnerable parts such as hammers and rotors need to be replaced and maintained regularly to extend their service life.

2. Troubleshooting: When the crusher malfunctions, it is necessary to promptly investigate the cause of the problem and carry out repairs. Common faults include hammer damage, rotor fracture, etc., which need to be handled according to specific situations.

3. Safety maintenance: When using the crusher, attention should be paid to safe operation to avoid safety accidents caused by improper operation. Especially for crushers with transmission devices, it is necessary to regularly check the status of the transmission device to ensure safe use. The crusher is an important mechanical equipment, and its correct maintenance and upkeep can extend its service life and improve production efficiency. Here are some maintenance plans for crushers.