Stainless steel flap door

Stainless steel flap door

Product Name:Stainless steel flap door

Product model: PM, ZPM

Structural forms: circular and square

Product specifications: 100-2000mm

Nominal pressure: 0.1MPa

Applicable temperature: ≤ 80 ℃

Applicable media: sewage, seawater, clean water

Product features: PM type flap doors are mainly used for pipelines with low pressure loss requirements.Generally installed directly at the outlet end of the water pump, in situations with high impact resistance,

The materials used for production can be cast iron, fiberglass, and steel parts, with square and circular shapes. With slight modifications, it can be used as a cellar cover.Chao Men and Pai Men are both one-way valves that can serve as reverse check valves.

Three,Stainless steel regulating barrier gateDetailed introduction ；

1.Stainless steel gates are control facilities used to close and open drainage channels, and are an important component of hydraulic structures. They can be used to intercept water flow, regulate flow rate, control water level, discharge sediment and floating debris, etc.

2.Stainless steel regulating barrier gateThe door leaf includes: load-bearing structure, walking support, support arm, hinge, water stop device, lifting ear, etc.

3.The embedded parts of the stainless steel gate include: track, hinge seat, water stop seat, corner guard, etc. Stainless steel gate is lightweight, has good corrosion resistance, and has waterproof performance

Good anti-corrosion performance, long service life, capable of bi-directional pressure bearing conditions, and good sealing performance.

4.The overflow section of the stainless steel gate is the same width as the channel; The ultra wide type can be made into double suspension points for opening and closing, with strong adaptability to channel depth; Rubber seal.

5.Composed of active parts (also known as door leaves), embedded parts, and opening and closing machinery3Partial composition.

6.Stainless steel gates can be used to control the flow of various types of fluids such as water, mud, various corrosive media, liquid metals, and radioactive fluids.

Supply products:Louver valve、Pressure relief valve、Stacked beam gate、Stainless steel sleeve mud discharge valve、pneumatic bell valve、Two way material distribution valve、Cast iron copper inlaid square gate、Steel square gate、Concealed cast iron copper inlaid gate、Bar valve、Single and double-layer rod valve、Stainless steel gate、Stainless steel channel gate、Cast iron copper inlaid gate、Cast iron copper inlaid slide valve、Ventilation Butterfly Valve、slap the door、Mud discharge valve、Stainless steel regulating barrier gate、Blind valve, plug valve, ash discharge valve、Knife Gate Valve、explosion-proof valve、Lift type proportional valve、Impeller feeder，Three way material distribution valveVarious types such as ball valvesNon standard valves.