Stainless steel powder single point sampler - particle sampler

Stainless steel powder single point sampler

Features:

1. The sampling amount of powder particles can be adjusted, with a sampling amount adjustment range of 0.1ml-4.0ml, increasing by 0.1ml, for a total of 40 types (expressed in volume)

2. The sampler is a sampling point that can obtain three samples at the same position.

2. Material: Made of high-quality SUS316L stainless steel

3. Surface treatment: The sampler is polished with mirror finish both inside and outside, making it easy to clean

4. Suitable for sampling powder and granular items

5. Compliant with GMP and FDA requirements in the pharmaceutical industry

requirement

1. Total length 1500mm, outer diameter 30mm. Sampling slot size: length x width x depth=40mm x 20mm x 20mm
2. Material: 316L stainless steel, all welds are fully welded, finely polished, with defects such as pits and gaps
3. The inner and outer sleeves are tightly matched and easy to rotate for sampling and separation, without producing metal particles

Batch sampling can be easily performed using silo rockets. The Silo sampler is highly suitable for sampling pharmaceuticals, cosmetics, and food. This design allows for rapid point sampling of powders and particles in silos, oil tankers, trucks, and general bulk containers.

To collect samples, simply insert the sampler into the material and rotate the handle to collect the sample. Take out the sampler after sampling.

Stainless steel powder single point samplerIt is a commonly used single point powder sampling tool, made of high-quality stainless steel and developed according to similar foreign products. Both the inside and outside are mirror polished, suitable for sampling flowable powders and granular objects. It is widely used in industries such as pharmaceuticals, chemicals, food, and cosmetics.

Product Features

1. Single point sampling (unit dose), one point of sample can be taken at a time.

2. Made of stainless steel material, it does not contaminate the sample.

3. The inner and outer walls of the product are mirror polished to prevent sample contamination and make cleaning easier.

4. Easy to clean, can prevent the retention of bacteria and pollutants.