Submersible thruster fiberglass impeller

In general, the materials used for submersible thruster equipment vary, so it is necessary to inquire with the supplier when purchasing the equipment. When the process and other conditions are the same, different materials can lead to significant differences in prices. No matter how the equipment supplier introduces the performance of the equipment to you, they should ask the supplier to provide previous successful cases and then send someone to inspect the sewage treatment effect on site. Although it may delay some time, it is indeed a very critical matter.

Submersible thruster fiberglass impellerIt has a relatively good hydraulic design structure, high work efficiency, and swept back blades with self-cleaning function, which can prevent debris from entangling and blocking; Mixing with the aeration system can significantly reduce energy consumption, increase oxygen filling capacity, and effectively prevent sedimentation; The insulation level of the motor winding is F, and the protection level is IP68. High quality bearings and anti condensation devices are selected to make the operation of the motor safer.

Submersible thruster fiberglass impellerThe mixing and stirring series submersible mixer is suitable for mixing liquids containing suspended solids in sewage treatment plants and industrial processes; Mixing and uniformity of sewage, wastewater, sludge water; Thickening process; Sludge dewatering process; Heat transfer optimization; Cleaning of sewage tank; Prevent particles from condensing and settling on the pool walls and bottom; Remove suspended solids; Create water flow, etc.

The selection of QJB type low-speed impeller material for underwater submersible thrusters is a complex task, and the correctness of the selection directly affects the normal use of the equipment. As a principle of selection, it is necessary to ensure that the mixer can fully exert its mixing function in the appropriate volume, which can generally be determined by the inlet speed. According to the different process requirements of sewage treatment plants, the inlet speed of the mixer should be ensured to be within the specified range. If the inlet speed is lower than, it will not achieve the effect of promoting mixing. If the inlet speed exceeds, it will affect the process effect and cause waste. So before selecting, first determine the location where the low-speed impeller will be used, such as sewage tanks, sludge tanks, and biochemical tanks; Next are the parameters of the medium, such as suspended solids content, viscosity, temperature, and pH value; Also, the shape and depth of the pool.