Supply of central transmission single tube suction dredger

Supply of central transmission single tube suction dredgerMain performance:
1. The bottom of the pool is scraped with mud, and the driving device adopts a deceleration driving mechanism for transmission, with a compact structure and high mechanical efficiency;
2. Diagonal scraper with good continuity and high efficiency in collecting mud; Install a scraper rubber plate under the stainless steel scraper plate to ensure that the scraper is clean and there is no floating mud phenomenon.
3. The slope ratio of the pool bottom is 1:10, and the sludge resistance during scraping can be ignored.
4. The main beam is made of square steel with high structural strength. It adopts hot-dip galvanizing and then spray coating technology, which has strong anti-corrosion performance. The main beam can also be directly poured with concrete, which saves more investment.
5. Easy to operate and capable of remote control.

6. An aerator is used in the contact oxidation tank for air blowing aeration, causing the fiber bundles to continuously float and aerate evenly, resulting in mature microbial growth and possessing the characteristics of activated sludge process;

7. The average residence time of contact oxidation method is more than 6 hours;

8. The fillers in the contact oxidation tank are mostly composite soft fillers, which are lightweight, high-strength, physically and chemically stable, have a large specific surface area, strong biofilm adhesion ability, and facilitate the contact between sewage and biofilm;

9. Stable effluent quality, low sludge production and easy treatment;

Supply of central transmission single tube suction dredgerPrecautions for use

Preparation before operation: Fully understand the structure, performance, functions, and working principles of the equipment, master the operating essentials and precautions. Thoroughly inspect all parts of the equipment to ensure that it is intact and undamaged. Confirm that the equipment wiring and power status are normal, and ensure that voltage, current, and other parameters meet the requirements. Select appropriate working modes and operating parameters based on actual work needs. Check the work environment to ensure compliance with safety standards and eliminate potential safety hazards.

Personal protection: Operators must wear necessary protective equipment such as safety helmets, goggles, protective gloves, etc. before operation to ensure personal safety.

Equipment inspection: Before starting the equipment, ensure that all components of the suction machine are in good condition and free from looseness or damage. Especially key components such as suction heads, shafts, pipelines, etc.

Operation process: Start according to the device's specified program and prohibit the use of abnormal startup methods. During the operation of the equipment, the operator should closely monitor the operating status of the equipment, pay attention to the display of instruments and indicator lights, and immediately stop the machine and report for maintenance if any abnormalities are found.

Equipment maintenance: After the operation is completed, perform routine maintenance on the equipment, including equipment cleaning, lubrication, fault inspection, and other work. If any equipment malfunction or abnormality is found, it should be reported for repair in a timely manner. It is not allowed to repair or modify the equipment structure without authorization.

Safety training: Operators should receive regular equipment operation and maintenance training to enhance their technical skills and continuously learn safety operation knowledge.