-
E-mail
1421506823.qq.com
-
Phone
18824524163
-
Address
No. 3, Pailou Ji Education Road, Wanjiang Street, Dongguan, Guangdong
Product Categories
Dongguan Geyang Electromechanical Equipment Co., Ltd
TBI Rail Low Assembly Series TRS20VS
NegotiableUpdate on 04/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Advantage features: TRS20VS linear guide belongs to the low assembly series linear guide, with a combination height of 28mm and a slider mounting hole of 32mm
Product Details
Advantages and Characteristics:The TRS20VS linear guide belongs to the low assembly series of linear guides, with a combination height of 28mm and a slider mounting hole of 32mm. The TRS20VS linear guide should be carefully installed and used, and strong stamping is not allowed. It is not allowed to directly strike the guide with a hammer or transmit pressure through rolling elements.
| model | Assembly specification mm | Slide size mm | Sliding rail mm | |||||||||||||||
| H | W2 | E | W | B | L | L1 | Q×l | T1 | oil hole | N | W1 | H1 | ΦD | h | Φd | F | ||
| TRS20VS | 28 | 11 | 4.6 | 42 | 32 | 49.4 | 27.8 | M5×6 | 4.5 | M6x1 | 14 | 20 | 16.5 | 9.5 | 8.5 | 6 | 60 | |
| model | Rated load kgf | Allowable static moment | weight | ||||||
| C | Co | Mx（kgf-mm） | My（kgf-mm） | Mz（kgf-mm） | Sliding block kg | Sliding rail kg/m | |||
| Single slider | Single slider | Double slider | Single slider | Double slider | |||||
| TRS20VS | 1398 | 2140 | 21615 | 10700 | 59798 | 10700 | 59798 | 0.15 | 2.28 |
The guide rail worktable is equipped with two rolling linear guides, each with two sliders to ensure stable movement. The two goals of straightening are: 1. The straightness error of the reference guide rail should be within the specified range; 2、 The parallelism error between the two guide rails has reached the specified value.
CCD can be installed in both positive and negative directions. When the CCD is installed correctly, the calculation results provided by the measurement system will match the actual situation. If reversed, the result will be opposite to the actual direction, so special attention should be paid when adjusting the straightness of the guide rail. The coordinates of the video window are to the right as the positive X-axis and downwards as the positive Y-axis, with the origin at the center of the video window. The center coordinate in the status bar (bottom right corner) is the coordinate value of the image center in the video window, measured in pixels.
