-
E-mail
1421506823.qq.com
-
Phone
18824524163
-
Address
No. 3, Pailou Ji Education Road, Wanjiang Street, Dongguan, Guangdong
Product Categories
Dongguan Geyang Electromechanical Equipment Co., Ltd
TBI linear guide \ low assembly slider \ TRC15VS
NegotiableUpdate on 04/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Advantage features: TRS15VS linear guide belongs to the low assembly series linear guide, with a combination height of 24mm and a slider mounting hole of 26mm
Product Details
Advantages and Characteristics:The TRS15VS linear guide belongs to the low assembly series linear guide, with a combination height of 24mm and a slider mounting hole of 26mm. The TRS15VS linear guide can be used for long-distance measurement.
Model: TRS15VS
The TRS15VS linear guide belongs to the low assembly series linear guide, with a combination height of 24mm and a slider mounting hole of 26mm. The TRS15VS linear guide can be used for long-distance measurement.
| model | Assembly specification mm | Slide size mm | Sliding rail mm | |||||||||||||||
| H | W2 | E | W | B | L | L1 | Q×l | T1 | oil hole | N | W1 | H1 | ΦD | h | Φd | F | ||
| TRS15VS | 24 | 9.5 | 3.2 | 34 | 26 | 40.3 | 22.9 | M4×5 | 5.5 | M4x0.7 | 7 | 15 | 13 | 7.5 | 6 | 4.5 | 60 | |
| model | Rated load kgf | Allowable static moment | weight | ||||||
| C | Co | Mx（kgf-mm） | My（kgf-mm） | Mz（kgf-mm） | Sliding block kg | Sliding rail kg/m | |||
| Single slider | Single slider | Double slider | Single slider | Double slider | |||||
| TRS15VS | 908 | 1471 | 10957 | 6420 | 33531 | 6420 | 33531 | 0.09 | 1.32 |
Characteristics of TBI linear guide rail
1. Simple lubrication structure
If the lubrication of the sliding guide is insufficient, it will cause direct friction and wear of the metal on the contact surface of the bed. However, it is not easy to lubricate the sliding guide sufficiently, and it is necessary to drill holes at appropriate positions on the bed to supply oil. The linear guide rail is equipped with an oil nozzle on the slider, which can be directly filled with grease with an oil gun or connected to the oil supply pipe with a dedicated oil pipe joint for automatic lubrication of the oil supply machine.
2. Easy assembly and interchangeability
Linear guide rails have interchangeability, allowing for the replacement of sliders, slides, or even linear guide rail groups, allowing the machine to regain high-precision guidance.
3. Low wear can maintain accuracy for a long time
Traditional sliding guidance inevitably results in poor platform motion accuracy due to oil film backflow, and insufficient lubrication during motion leads to wear on the contact surface of the running track, seriously affecting accuracy.
4. High positioning accuracy
When using a linear guide as a linear guide, due to the rolling friction mode of the linear guide, not only does the friction coefficient decrease to 1/50 of the sliding guide, but the difference between the dynamic friction force and the static friction force also becomes very small.
5. Suitable for high-speed motion and significantly reduces the required driving horsepower of the machine
Due to the very low friction force when the linear guide moves, only a small amount of power is needed to make the bed run, especially when the bed is in motion
When running back and forth frequently, it can significantly reduce the power loss of the machine.
6. Can withstand loads in all directions simultaneously
Due to the special constraint structure design of linear guides, they can simultaneously withstand loads in the up, down, left, and right directions, unlike sliding guides that can withstand lighter lateral loads in the direction of parallel contact surfaces, which can easily cause poor machine operating accuracy.
