-
E-mail
sales@tunkia.com
- Phone
-
Address
No. 16 Panpan Road, Changsha Economic and Technological Development Zone
Product Categories
Changsha Tianheng Measurement and Control Technology Co., Ltd
TD8568 Electrical Steel Repeated Bending Test Device
NegotiableUpdate on 05/27
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The TD8568 electrical steel repeated bending test device is specifically designed for testing the bending and planar reverse bending of electrical steel sheets, and is widely used in steel metallurgy plants, transformer/motor manufacturers, and other industries
Product Details
Product Introduction
TD8568 is a testing equipment specifically designed for electrical steel sheet bending and planar reverse bending.◉ Suitable for detecting dimensions of30 mm × 300 mmThe performance and defects exhibited by a single piece of electrical steel sheet in withstanding plastic deformation during repeated bending.
Widely used in steel and metallurgical plants, transformers/Motor manufacturers and other equipment are indispensable for testing the cold bending performance of electrical steel.
◉ Reference standards:GB/T 2521.1-2016The Full Process Cold Rolled Electrical Steel 1 Part: Non oriented grain steel strip(a flat)》(appendixA )、ASTM A720 / A720M
Functional Features
Testers can use the LCD control panel to 0 ～ 9999 Set the number of bends within the range.The upper and lower clamping blocks automatically tighten the tested steel sheet and apply approximately70 NThe tension(Tension sensor measurement).
The bending radius of the lower clamp block is5 mmThe bending radius of the sample shall not be less than± 90°.
The digital counter displays the number of bending times in real time, and the test automatically stops when the set number of times is reached.
The device is equipped with a safety protection cover to cover the entire bending test device to avoid safety hazards.
◉ Automatic loading and unloading device(option)Control the robotic arm and vacuum suction cup through a program to automatically complete processes such as loading, bending testing, and unloading.
◉ Operators only need to regularly insert the test samples and remove the tested samples, greatly reducing reliance on manual labor.
technical specifications
Similar Product Recommend
