TENAX/TVOC sampling tube

TVOCSampling tubeGlass/stainless steel tube with 200mg filler inside

Adopting the original imported 60-80 mesh Tenax TA filler 2,6-diphenyl-p-phenylether porous polymer support, it has good temperature resistance (extremely low loss) and is widely used in the adsorption of organic volatile and semi volatile compounds, as well as in the pre-treatment methods of capture/thermal desorption. It is designated as a filler by USP EPA and NIOSH. The surface area of the adsorbent is 35m2/g, the pore volume is 2.4ml/g, the average pore size is 200nn, the particle size is 60/800 mesh, the density is 0.25g/ml, the resolution is 90%~99%, and the adsorption rate is 98% (+1%).

Tenax TA is a porous polymer support of 2,6-diphenyl-p-phenylether, which has good temperature resistance (extremely low loss) and is widely used for the adsorption of organic volatile and semi volatile compounds. It can also be used in capture/thermal desorption pretreatment methods and is designated as a filler by USP EPA and NIOSH.

There is also activated carbon availableSampling tube(CS2 solvent analysis method and thermal analysis method), silicone gel (CS2 solvent analysis method and thermal analysis method), U-shaped 10ML/50ML porous glass plate absorption tube white/brown, sulfur dioxide absorption bottle white/brown, large bubble absorption tube/small bubble absorption tube, large impact absorption bottle (300ml/325ml two types), 10ML impact absorption tube (impact gas sampling bottle), 125ML flue gas absorption bottle (flue gas sampling device absorption bottle), 25ML/50ML/75ML porous glass plate absorption bottle, nitrogen oxide absorption bottle (brown), 250ML absorption bottle washing, stopper colorimetric tube and other sampling and analysis accessories consumables.