TH0230 Wiring Type AC/DC I/V Conversion Standard

NegotiableUpdate on 05/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

TH0230 Wiring AC/DC I/V Conversion Standard I/V Precision AC/DC Current Conversion Standard can convert a nominal current of 0.1 A to 1 kA into a low voltage DC of 1 V within the frequency range of DC, 10 Hz to 5 kHz (3dB signal bandwidth ≥ 100 kHz), with an optimal ratio uncertainty of 5 ppm (D version) and an optimal ratio uncertainty of 100 ppm (D version) at working frequency

Product Details

Product Introduction

TH0230 is a set of I/V precision AC/DC current conversion standards, divided into four versions based on accuracy: A, B, C, and D. Can operate in DC, 10 Hz~5 kHz
Convert the nominal current of 0.1 A to 1 kA into a small voltage of 1 V within a frequency range of 3dB signal bandwidth ≥ 100 kHz.
The optimal ratio uncertainty for DC is up to (D version), and the optimal ratio uncertainty for working frequency is up to 5 ppm with a maximum of 100 ppm (D version), supported by positive and negative current measurements.
Equipped with a DC current zero point multi turn potentiometer and locking device, the primary and secondary outputs have good electrical isolation and high common mode rejection ratio.
In a series high current circuit using conventional wiring, the secondary output can be paired with a precision voltmeter to achieve precise measurement of current.
◉ Can be widely used for calibrating AC/DC high current sources/meters (such as clamp meter calibration devices), current sensors/transformers, welding machines, micro ohmmeters, and other applications that require precise measurement of current.
The device can also be paired with a broadband AC/DC V/V voltage divider and a dual channel voltage analyzer to form a precision broadband AC/DC power/energy measurement system.

technical specifications

TH0230.1