TRS15FS

NegotiableUpdate on 04/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Advantage features: TRS15FS linear guide belongs to the low assembly series linear guide, with a combination height of 24mm and a slider mounting hole of 41mm

Product Details

Advantages and Characteristics:The TRS15FS linear guide belongs to the low assembly series linear guide, with a combination height of 24mm and a slider mounting hole of 41mm. The size of the TRS15FS linear guide can be maintained within a certain level, and the slider is designed with a retainer to prevent steel balls from falling off.

Model: TRS15FS

model

Assembly specification mm

Slide size mm

Sliding rail mm

Q×l

oil hole

ΦD

Φd

TRS15FS

18.5

3.2

40.3

22.9

M5×7

5.5

M4x0.7

7.5

4.5

model	Rated load kgf		Allowable static moment					weight
	C	Co	Mx（kgf-mm）	My（kgf-mm）		Mz（kgf-mm）		Sliding block kg	Sliding rail kg/m
			Single slider	Single slider	Double slider	Single slider	Double slider
TRS15FS	908	1471	10957	6420	33531	6420	33531	0.12	1.32

A brief introduction to TBI guide rails

TBI guide rail is a guide rail produced by a Taiwanese company. This brand's guide rails have outstanding performance. On the one hand, the TBI guide rail has high positioning accuracy. Therefore, when we use the TBI guide rail, it reduces the friction coefficient to one fiftieth of the sliding guide through stick friction. At the same time, the difference between the dynamic friction force and static friction force of the guide rail is much smaller. So, during the operation of the lathe, the phenomenon of slipping can be avoided.

On the other hand, because the friction of TBI guide rails is very weak when they move, even lathes that require high-speed movement can operate normally using ABBA guide rails. In this way, the power loss of the machine can be significantly reduced, and it can still be operated with instructions.

However, when using TBI rails, there are several small things to pay attention to. Below are a few tips for everyone.

Firstly, the guide rail and slider must be fixed to the machine with a specific torque in order to reproduce the highly accurate density during processing.

In addition, when the sliding guide of the lubrication structure is not lubricated properly, it should be supplied with oil through brick holes at a rough location in the yard to achieve the purpose of lubrication. And the linear guide rail can be directly oiled at the muzzle of the oil injection gun. If you want the guide rail to automatically lubricate it, you need to replace it with a professional connector to connect the oil pipe.

There are many products used in TBI guide rails, which can be applied not only in the BRH series, such as lathes, brick beds, and so on. It can also be used in the BMS series, such as printers, electronic equipment, and so on.