TWYX high-pressure fan high-pressure vortex air pump

TWYX high-pressure fan high-pressure vortex air pump

The high-pressure vortex air pump strictly prohibits solids, liquids, and corrosive gases from entering the pump body.The use and installation of vortex air pumps should be placed in a relatively stable place, and the surrounding environment should be clean, dry, and ventilated. The rotation direction of the impeller of the vortex air pump must be in the direction indicated by the arrow on the fan casing. Except for the two bearings of the motor rotor, there is no direct contact friction in other parts of the vortex fan. The bearing on the air pump end is installed in the pump body between the motor base and the impeller, and this type of air pump does not require lubricating grease during normal operation. The maintenance and upkeep of the bearings on the fan end of the air pump motor shall be in accordance with the * class air pump. The filter screens and silencing devices at both ends of the vortex air pump should be cleaned in a timely manner according to the situation to avoid blockage and affect use. The replacement of bearings for vortex air pumps must be carried out by personnel familiar with repair work.

high-pressure blowerTo determine the function of the vortex air pump used on site, whether it is suction or blowing, and to find the corresponding pressure flow curve of the vortex fan. Based on the calculated pressure and flow rate, find the working curve above the corresponding working point that satisfies both pressure and flow rates on the curve graph; Then select the model of the vortex fan based on the working curve.The casing material of the high-pressure fan adopts die cast aluminum, which is the same aluminum material as the wheel hub of Mercedes Benz cars. Compared with ordinary aluminum alloy, die cast aluminum is stronger and has a lighter weight effect compared to iron shell fans. High pressure fans have a flow rate greater than similar products at the same power and pressure. The high-pressure fan cover adopts a sheet-like heat dissipation design, which is equivalent to a motorcycle engine heat dissipation device, greatly reducing the temperature during fan operation. The high-pressure fan adopts the principle of bearing pre design, with two bearings placed at the front end of the fan blades and the rear end of the motor, achieving dynamic balance configuration and facilitating heat dissipation. The high-pressure fan adopts a special shock-absorbing foot design, which greatly reduces the vibration generated during the operation of the fan.

TWYX high-pressure fan high-pressure vortex air pump