TWYX high-pressure gas ring vacuum pump high-pressure fan

TWYX HighPressure ring vacuum pump high-pressure fan

The air ring vacuum pump is easy to install and can be installed in any horizontal or vertical direction with high reliability. Apart from the impeller, the air ring vacuum pump has no other moving parts and is almost maintenance free. Low vibration mechanical precision is high, and the rotating components have undergone extremely precise balancing design, testing, calibration, and low vibration rates. Low noise air ring vacuum pumps all have built-in silencers to reduce operating noise. The sturdy structure of the fan surface is made of aluminum alloy and milling alloy, which is different from general aluminum or iron shell fans and more durable. There are many specifications for gas ring vacuum pumps, including high pressure and high air volume series, which can be flexibly selected. No oil, no pollution, calm as water In order to ensure the normal operation and performance of the gas ring vacuum pump, it is necessary to strengthen the maintenance of the gas ring vacuum pump in daily maintenance. Regularly clean the dust and dirt inside the air ring vacuum pump, especially at the blades, according to the specific usage situation, and prevent rusting. During operation, it is necessary to regularly check whether the bearing temperature is normal, and the bearing temperature should be less than 40 ℃. If any abnormal conditions are found during the start-up, shutdown, or operation of the gas ring vacuum pump, immediate maintenance should be carried out. To ensure personal safety, maintenance of the air ring vacuum pump must be carried out during parking.

The selection process is also relatively complex, requiring the following two steps to determine the function of using an air ring vacuum pump/compressor on site, whether it is suction or blowing, and to find the corresponding pressure flow curve of the air ring vacuum pump/compressor; If the curve is misread, sometimes the selected product cannot be used based on the calculated pressure and flow rate. Find the working curve above the corresponding working point that satisfies both pressure and flow rates on the curve graph; Then select the high-pressure blower model based on the working curve; As long as it is a different work site, its requirements for pressure and flow rate are different, so in order to obtain relatively accurate data, relevant calculations need to be carried out. A vacuum pump is a basic equipment used to extract gas from a closed container to obtain vacuum. The auxiliary oil tank set on the side of the pump and the optional anti emulsification vacuum pump oil are more suitable for vacuum application fields such as small vacuum freeze-drying units and lithium bromide refrigeration units that extract small amounts of water vapor.

TWYX HighPressure ring vacuum pump high-pressure fan