Temperature monitoring device

Baoying BaofeiWS-2C（YYL）Temperature monitoring deviceIt is a simple and efficient tool for on-site equipment monitoring, control, and analysis. It is mainly used for monitoring and protecting large machinery and rotating equipment from excessive vibration during continuous operation. It can avoid equipment damage and personnel injury caused by equipment malfunction and increased vibration amplitude. It is an essential monitoring instrument for equipment maintenance and upkeep. During user use, control values can be set based on the allowable vibration level of the device. When there is an abnormal phenomenon during the operation of the device, and the vibration value increases or exceeds the set value (SP value), the alarm indicator light will turn on. If the continuous overshoot time exceeds the set delay time, the second-order alarm (SP2, SP4 warning green light, SP1, SP3 alarm red light) indicator light will turn on, and the internal relay of the instrument will work to effectively control the main power supply of the equipment, prevent accidents, and achieve the purpose of protecting the equipment.The transmission output can be directly connected to DCS, PLC or other devicesFor the convenience of on-site installation, wall mounted or cabinet mounted installation is adopted. This product has the characteristics of dust prevention, small size, reasonable structure, stable and reliable performance, and accurate action.

1. Sensor (input):

ZW-2A temperature vibration integrated probe(Waterproof; wire length)20M)

2. Number of channels: Dual channels

3. Measurement range

Vibration speed:0-1000mm/s (adjustable);

temperature0-200 ° C (adjustable)

4. Alarm and control: divided into two stages of alarm: the first stage is warning (SP2, SP4), which controls the output relay to work; The second stage is the alarm (SP1, SP3), which controls the operation of the output relay

5. Warning and alarm setting range: any set value within the measurement range

6Speed value display error: < 1%

7. Output: 0-1000mm/s;0-200°CCorresponding measurement values4―100mA

output

8Relay contact output: AC220V/5A(resistive load) orAC220V/0.3A(inductive load), Normally open (adjustable)

9. Working power supply: 85-240V 50/60Hz

10. External dimensions: Panel Size:160（Long)80mm in height;

cutout size: 152⁺¹×76⁺¹Mm; Depth: 88mm

11. Working environment: a non corrosive gas environment with a temperature range of -10 to 60.0 ℃, a relative humidity not exceeding 85, and a place without strong electromagnetic interference

WS-2C（YYL）Temperature monitoring device

Operation Instructions:

1. Panel Description

（1) PV1 and PV2 are the first and second channel display windows: normal display of vibration measurement values; Display parameters and parameter value symbols in parameter modification state.

（2) SP2 and SP4 indicator lights: When this indicator light is on, there is output from the corresponding channel of the lower limit relay on the instrument.

（3) SP1 and SP3 indicator lights: When this indicator light is on, there is output from the corresponding channel of the upper limit relay on the instrument.

（7) SET key: Press the key for 1 second to enter the parameter modification state; Press SET again to enter the next parameter value modification state.

（8) Shift key（►）Pressing this key while modifying parameters can move the position of the modified number.

（9) Number reduction key（▼）Number reduction can be achieved in parameter modification, given value modification, or manual adjustment states.

（10) Number increase key（▲）Number increase can be achieved through parameter modification, given value modification, or manual adjustment.

（11) Return key (MAN): When the instrument is running, press the (SET) key first and then the (MAN) key to enter the parameter setting state in Table 2. After modifying each parameter