The touch screen FFU network controller of Shixu Electromechanical is suitable for FFU units that require group control. It has the characteristics of easy operation, easy control, and low cost, filling the gap in domestic FFU group control.
The touch screen FFU network controller of Shixu Electromechanical is developed and produced by our company, using a 7 "widescreen 800x480 touch screen, with a touch count * less than 1 million times.
The introduction of the Shixu Electromechanical FFU controller is as follows:
one、FFU touch screen typenetwork controller
Product Introduction:
A.400MHz CPU、128MBMemory
B. SupportUSB2.0download cable
C.LEDBacklight module
DBuilt in power isolation protector
EFanless cooling system
F. Adopting7” Widescreen 800x480Touch screen, less touch frequency *100one million time
2、 LCD screen typeFFUnetwork controller
1Characteristics:
A.FFUThe network control host adopts high-performance technologyMUCUsing a microcontroller as the core processor to implement control functions,use128*64 LCDLiquid crystal display.
BCan be controlled separatelyFFUFans can also be controlled in groupsFFUFan.
C. Can be queried individually or in groupsFFUFan operating status.
DWhen the fan malfunctions, the host will issue an alarm upon inquiry.
ERead back the temperature, humidity, pressure difference, and cleanliness values of different control areas (corresponding software and hardware modules need to be added).
FEquipped with backlight128*64 LCDDisplay, easy to operate.
G..Remote communication adoptsModbus RTUagreement.
HThe communication rate is9600bps, even verify,8Number of data points,1Stop position.
KOne host * multiple controllable512Typhoon fan(3Gear position).
LUsing network control hosts instead of computers to reduce system costs and improve system stability