Turbidity meter TURB-1200

application area

◆ Water and wastewater treatment ◆ Monitoring of drinking water and surface water indicators ◆ Chemical operation process ◆ Reclaimed water

Instrument features

144 * 144 microcomputer designed turbidity controller

◆ Outdoor waterproof design suitable for wall mounted, panel mounted, and circular pipe installation

◆ Provide electrode automatic cleaning device contacts, program setting output

Large LCD display screen with operation status and special symbol display

◆ Equipped with backlight sensor, automatic and manual backlight setting function

5 point automatic calibration, single point calibration can be adjusted according to laboratory or on-site analysis

◆ Password lock and combination key enter the setting, calibration mode design, and increase security protection

Equipped with RS-485 standard MODBUS communication protocol, it can be directly connected to digital systems (MB-300-TB-2RS serial only)

90 degree angle optical monitoring principle design, in compliance with U.S.EPA and ISO7027 specifications

Two sets of programmable outputs (MB-300-TB-2 serial only)

Technical Parameter

Measurement mode turbidity

Measurement units NTU, FTU, FNU

The measurement range depends on the sensor

Resolution AUTO (0.01, 0.1, 1)

Relay output with two sets of ON/OFF contact outputs, with arbitrary program settings for high and low points and hysteresis zones, 240VAC/0.5A

◆ Analog output 1 or 2 channels of 4-20mA analog signal output, users can set the corresponding output value, load 500 Ω

Basic parameters

◆ AC power supply 100V~240VAC ± 10%, 50/60Hz

◆ DC power supply 20-40VDC

Working temperature: 0~50 ℃

Instrument size 144mm × 144mm × 115mm (H × W × D)

◆ Protection level meets IP65 (NEMA 4)

Installation methods include wall installation, panel installation, and circular pipe installation

Excavation size 138mm × 138mm (H × W)

Weight 0.8 Kg

Electrodes and accessories

Download: Turbidity, suspended solids, sludge concentration electrodes and accessories