Two layer/three-layer constant temperature and humidity test chamber

Two layer/three layer designHumidity Chamber

(Programmable

TOP Temperature&Humidity Chamber)The testing standards that comply are:MIL

STD,GB,JIS,JEDEC,IEC

1. Wait.

2. Product advantages:Each test space on each floor is independent, with independent temperature and humidity control. 0 constant value9999Conditional time can be set:59~hour

3. minute.formula120Capacity: AvailableeditGroup program×1500paragraph,each paragraph59Time can be set from 0 to 99hourminute,The number of segments can be arbitrarily divided

4. ,Programs can be freely interconnected.Loop setting: executable9999×999Number of cycles5,
5. And it can be further cut outThe independent part of the cycle.Control method: Advanced slope control logic，Adopting intelligent technology
6. PID+SSR/SCRForward and reverse bidirectional synchronous output.Data setting: Touch based dialog box setting mode,Easy and clear operation
7. ,Built in directory data management system.Curve drawing: actual operationTemperature and humiditycurveRecord and display;equalProgrammedTemperature, humidity, and time data completed
8. ,3It can be immediately converted into a set curve.Time signal:Group time control output interface10,matchTime control mode for planting,Easy to execute external driver component startup
9. /Stop time style planning.End temperature: upon completion of testing,Optional execution to return to room temperature state
10. ,To facilitate the extraction of the test substance.Security Check: Full featured System Detection.,
11. Ensure the safe operation of the machineAnd it can automatically display the faulty items.External protection:FreestandingOver temperature protection device,Can set the test object
12. ofTemperature upper limit protection.Communication interface: attachedRS-232reachRS-485　

　

The standard communication interface device.Optional items（option

1. ）：

2. USB Experimental data reading device

3. Labview

4. software interfaceUnable to open the door device during operationTempered glass inner door(

5. Attached operating hole

6. )

7. Automatic temperature and humidity recorder

8. Pure water treatment device

9. Honeycomb Chemical Dehumidification SystemOperation record software

10. LN2

Rapid cooling system

Infinite remote control network system

Controller photo:

Controller selection 1Controller selection 2

Temperature and humidity curve chart： 　 　 　

Model Meaning

　

： Specific specifications/SPEC:

※ Other size requirements can be customized according to customer requirements	Model	model
Q-TH2 (two-layer)Q-TH3 (three-layer structure)Internal Dim. WÍH Í	D(cm)	Internal dimensions
40*42*4240*42*42External Dim. WÍH Í	D(cm)	Dimensions
100*155*75 100*192*75	Temp. Rangetemperature rangeHigh temperature:L:one hundred ℃,N:150℃Low temperature:A:0℃
, B:-20	3℃
, C:-40	℃0.5Relative Humidity RangeHumidity range
0%~98% R.H. Temp.& Humi. Constancy	Temperature and humidity control accuracy1.0±℃
; ± 2.5% R.H. Temp. & Humi. Uniformity	Temperature and humidity distribution accuracy±℃
; ± 3% R.H. Heat-up Speed	heating rate0About 3℃
/min Pull-down Speed	Cooling rate
About 1. ℃	/min
Exterior External material	stainless steelplate + coatingInteriorInternal materialSUS#304 stainless steel platePower source

power supply