Ultrasonic nozzle/ultrasonic air atomization nozzle

Ultrasonic nozzle (ultrasonic air atomizing nozzle) series: It can continuously generate thick fog with a size of 1-10 microns to cover the dust source and maintain a mixing ratio with dust particles. High frequency mechanical sound waves are generated through a specially designed vibration head that intersects with compressed air and vibrates at the airflow connection part, accelerating the speed of the air rushing through. The nozzle does not rely on high pressure to achieve the effect of atomizing water, almost completely eliminating the need for high-pressure water pump wear. Clean the nozzle chamber while the nozzle vibrates. The nozzle has no moving parts and is constructed of 100% stainless steel. Compared to brass nozzles. This eliminates wear and corrosion, extending the service life. In the recording of high-speed cameras, 2-micron water droplets directly span a distance of 2 meters. Any dust particles surrounded by dense droplets have no chance of escaping. The average size of atomized particles is less than 10 microns, also known as micron level dry mist dust suppression nozzle. There are three kinds of spray angles: 80 degrees, 60 degrees and 30 degrees.

There are two installation methods: ordinary installation and thin-walled installation, as well as the less commonly used universal ball base form. The thin-walled installation size is M20 * 1.5mm, the air inlet is 1/4, and the water inlet is 1/8. It can also be customized according to customer requirements.

Universal ball installation base
1. The flange mounted universal ball mounting base is installed through the flange in application scenarios, and the nozzle direction can be adjusted within a certain range (50 °) through the universal ball. Heating rods can be installed inside the base to prevent water sources from freezing in cold environments.
2. The welding installation universal ball mounting base is installed in the application through welding, and the nozzle direction can be adjusted within a certain range (50 °) through the universal ball. There is no heating device inside, and the appearance is compact.

There are two forms of nozzle appearance structure for each model: integrated and wire type
Integrated: The tripod supporting the vibration head is connected to the main body and cannot be disassembled;
Steel wire type: The tripod supporting the vibration head is made of steel wire embedded in the main body and can be disassembled

category	SK508 Nozzles80°	SV980 Nozzles30°	SV882 Nozzles60°
gas pressure	5.2bar	3.5bar	5.2bar
water pressure	1.2bar	0.6bar	1.2bar
gas consumption	115L/Min	260L/Min	240L/Min
Water consumption	7.1L/Hr	45L/Hr	20L/Hr
Atomized particle size	3-6microns	4-10microns	7-10microns
Gas filtration requirements	<40microns	<40microns	<40microns
Water filtration requirements	<50microns	<50microns	<50microns