Ultrasonic sludge concentration meter SUNTETC-7310-M

TKFL900Ultrasonic sludge concentration meter

Performance characteristics:

The measurement results are displayed in LCD digital display and bar chart, with units of% or g/L optional.

The output current value (4mA~20mA) is proportional to the measured concentration value.

◆ Optional 2-point or 3-point calibration, high measurement accuracy.

Users can set the fault alarm current output value.

Display real-time clock and set time intervals to automatically record concentration trend lines.

◆ Optional fieldbus interface.

The set parameters are stored in EEPROM and can be maintained for a long time even when powered off.

Application areas:

Water supply plant: sedimentation tank

Wastewater treatment plant: inlet and outlet, aeration tank, return sludge, primary sedimentation tank, secondary sedimentation tank, concentration tank, sludge dewatering, etc.

Paper mill: pulp concentration

Coal washing plant: sedimentation tank

Electricity: Mortar sedimentation tank

Technical Specifications:

Transmitter:

Measurement range: Activated sludge, 0~30g/L

Silicon dioxide, 0~100 g/L

Display mode: LCD widescreen display

Measurement units: g/L and mg/L are available for selection

Resolution: 0.05%

Accuracy: 0.05% FS

Repeatability:+1.0%

Power: ≤ 15w

Analog output: 4~20mA, load 7500

Digital interface: RS-232, Profibus communication interface (optional)

Switch output: 2 relays, capacity 220VAC/2A

Power supply: AC220V+10%, 50 Hz

Sensor:

Material: Stainless steel

Cable: shielded cable

Installation methods: immersion type, pipeline type

Process connection: ZG1

Connection thread size: M32mm

Medium pressure: ≤ 3 bar

Signal cable: 10M (optional)

Protection level: IP68 (immersion installation)

Working temperature: Sensor: -20~60 ° C

TKFL900Ultrasonic sludge concentration meter