VOC catalytic combustion equipment

Hebei Zhonghe Environmental ProtectionVOC catalytic combustion equipment、VOC exhaust gas treatment catalytic combustion equipmentManufacturers have extensive experience in utilizing science and technology to improve feasible solutions, and this one-on-one targeted design lays the foundation for product quality.

VOC catalytic combustion equipment、VOC exhaust gas treatment catalytic combustion equipmentIntroduction to Process Flow
In the process of exhaust gas treatment, what everyone knows more about is the introduction of VOC catalytic combustion equipment technology. This technology is currently being implemented in many exhaust gas treatment sites because it is better than other exhaust gas treatment technologies. Let me introduce the VOC catalytic combustion equipment technology to you.

The catalytic combustion of VOCs in exhaust gas treatment is actually catalytic oxidation, which means that harmful combustible components in the exhaust gas are oxidized into CO2 and H2O under the action of the catalyst. Due to the flammability of the vast majority of organic compounds, catalytic combustion has become one of the methods for purifying exhaust gases containing hydrocarbons. Moreover, due to the varying degrees of odor caused by a large proportion of organic compounds, catalytic combustion is also a means of eliminating odorous gases.

Technical characteristics of VOC catalytic combustion equipment and VOC exhaust gas treatment catalytic combustion equipment
1. Using high-quality 300 hole honeycomb catalyst, with low resistance, low ignition temperature, and high catalytic combustion purification rate;
2. The heat generated by the combustion of exhaust gas has been reused to save energy consumption; There are relatively small restrictions on the concentration and calorific value of combustible components;
3. The combustion temperature requirement is low. Under the action of a catalyst, most hydrocarbons and CO can complete the reaction between 300-3300 ° C without the need for auxiliary fuel;
4. Due to flameless combustion, it has good performance; Specially suitable for handling continuous emissions of gases;
5. The inclinometer vector frequency converter energy-saving frequency converter Beijing frequency converter system equipment has a small footprint and low investment cost. The equipment and process flow are simple, and the equipment failure rate is low.
In the design process of VOC catalytic combustion equipment and VOC exhaust gas treatment catalytic combustion equipment, the following aspects should be considered:
1. The airflow and temperature are evenly distributed. To ensure uniform airflow and temperature distribution across the catalyst surface, and to prevent direct flame contact with the catalyst surface, the combustion chamber should have sufficient length and space. The catalytic combustion device should have good insulation effect. The furnace body is generally lined with refractory materials on the outer shell of the steel structure, or with a double-layer sandwich wall structure.
2. Easy to clean and replace. Catalyst reactors should generally be designed with a modular drawer structure for easy loading and unloading, facilitating cleaning and replacement of catalyst carriers.
3. Auxiliary fuel and combustion assistance. Catalytic combustion generally uses auxiliary fuels such as fuel oil and electric heating. Generally, purified gas is used for combustion assistance. If the purified gas cannot be used for combustion assistance, air should be introduced for combustion assistance.
4. Higher conversion speed. Due to catalytic combustion being an irreversible exothermic reaction, regardless of the stage of the reaction, it should be carried out at the highest possible temperature to achieve a high conversion rate. However, the operating temperature is often limited by certain conditions, such as the heat-resistant temperature of the catalyst, the availability of high-temperature materials, the supply of thermal energy, and the presence of side reactions. Therefore, in actual production, appropriate choices should be made based on the actual situation.

As a manufacturer of VOC catalytic combustion equipment and VOC waste gas treatment catalytic combustion equipment, Hebei Zhonghe Environmental Protection has welcomed many partners in the production field with its rich technical knowledge and experienced team, which has greatly helped our dust removal business.