Vacuum dust removal system filter cartridge in feeding room

Vacuum dust removal system filter cartridge in feeding room

The main features of the explosion-proof high vacuum filter cartridge dust collector are: 1. It adopts an efficient anti-static electroplated aluminum filter cartridge, and the cylindrical pleated design increases the filtering area of the filter cartridge. On the basis of ensuring safety and anti-static, it improves the filtering effect and achieves a filtering efficiency of over 99.97% for dust larger than 1 µ m. 2. Adopting the German Siemens brand, its protection level meets the requirements of IP55 protection level in IEC60034-5 standard. 3. The dust collector adopts a lock gas ash discharge device for unloading. To prevent dust from accumulating in the hopper, the discharge valve must be kept normally open. The discharge valve should run 10 minutes before the system runs and stop 10 minutes after the system stops. 4. The dust collector is equipped with explosion-proof film or flameless explosion-proof (indoor) to reduce the economic losses caused by dust generation, release pressure in a directed manner, and make it safer; 5. The electronic control components are selected from Schneider and Siemens brands, and have functions such as phase loss, thermal overload, and phase sequence protection, which can effectively ensure the safe operation of the machine. 6. The cleaning method of the filter cartridge adopts a pulse solenoid valve connected to automatic pulse blowback, with a working pressure of 0.4-0.6MPa, and can be used by connecting to a gas source. 7. The motor adopts a flameproof three-phase asynchronous motor, and the explosion-proof motor uses a flameproof shell to separate the electrical parts that may generate sparks, arcs, and dangerous temperatures from the surrounding mixture. 8. Using explosion-proof control cabinets, electrical components are installed inside the cabinets to avoid interference from dust on the electrical components. Guangzhou Iron and Steel Plant's vacuum cleaning equipment has powerful vacuum cleaning technology and can work continuously for 24 hours without pressure.

Explosion proof vacuum cleaning system can meet the explosion-proof requirements in flammable and explosive dust environments, and is suitable for collecting flammable and explosive dust in zones 21 and 22. Conventional configuration: Anti static filter material+safety explosion-proof+explosion-proof electrical box: 1. Special configuration: Anti static film filter cartridge, which gradually introduces the static electricity of explosive dust into the ground through wires to achieve safe anti-static effect. 2. To fully ensure the safe operation of the machine, an explosion-proof membrane with a pressure resistance of 0.01MPa is installed on the equipment. Once it occurs, the membrane will quickly rupture and release pressure; When it does not occur, the diaphragm has certain wear and tear due to the influence of positive and negative pressure, and needs to be replaced regularly. 3. Using a flameproof electrical box, electrical components are installed inside the box to prevent accidents caused by sparks igniting explosive dust. The installation position can be placed in a convenient location according to customer needs.

In order to maintain the overall cleanliness of the factory and protect the atmospheric environment, many factories have purchased central dust collectors. However, whether the effectiveness of the dust collector meets the requirements depends on whether the design of the dust collector is reasonable. For conventional central dust collectors, when vacuuming at the source of dust production points, some dust still escapes, forming unorganized dust that scatters on the ground and equipment countertops. So this is just a set of vacuum cleaners to clean and absorb these unorganized dust for centralized processing. If the dust producing area is small and there are fewer dust producing points, using a regular vacuum cleaner can meet the requirements. But if the entire factory has a lot of dust, a wide area, and a complex equipment layout, it is recommended to install a set of * * vacuum suction system. **It can cover a distance of 200m for vacuuming, and the vacuuming points are arranged according to the actual situation. The dust sucked away is collected and processed in the dust collector, which is very convenient. Moreover, for situations with high dust levels, the advantages of industrial vacuum cleaners are very obvious, such as centralized processing, non-stop unloading, no secondary dust pollution, no need to drag wires, and can be plugged in and used as neededVacuum dust removal system filter cartridge in feeding room