Vacuum rubber tape

Rubber belt conveyor belt vacuum filter accessories

Vacuum rubber tapeProduct Features Advantages Conveyor Belt Vacuum Filter Accessories Material Technology:The circular rubber tape is made of EP200 four layer polyester cloth, and the tape skirt edge is formed by a combination structure of wavy skirt edges that are glued together. This structure group has better elasticity than Anan, which can prevent the skirt edge from being changed and broken by rolling, and can prevent the material from flowing out from both sides. The upper structure of the rubber belt consists of a middle row of drainage grooves, with vacuum drainage holes drilled in the middle of the grooves. The drilling location is a pure and non stepped layer, which can prevent liquid from entering the rubber layer through the fabric fibers and causing rubber delamination, greatly extending the service life of the rubber belt.

Vacuum rubber tapeFeatures:Efficient separation equipment that fully utilizes material gravity and vacuum suction to achieve solid-liquid separation. Using an integral circular rubber belt as the vacuum chamber. The circular tape is continuously driven by a motor, and the filter cloth is laid on the tape to run synchronously with it. The tape contacts the circular friction belt on the vacuum slide table and forms a water seal. The slurry is evenly distributed on the filter cloth by a fabric spreader. When the vacuum chamber is connected to the vacuum system, a vacuum filtration zone is formed on the tape. The filtrate passes through the filter cloth, collects through the transverse grooves on the tape, and enters the vacuum chamber through small holes. Solid particles are trapped on the filter cloth to form a filter cake. The liquid entering the vacuum chamber is discharged through a steam water separator, and as the rubber belt moves, it forms a filter cake that sequentially enters the filter cake washing area and the drying area. Finally, the filter cloth and tape are separated, and the filter cake is discharged at the discharge roller. The filter cloth that removes the filter cake is regenerated after cleaning, and then enters the filtration zone again after passing through a set of support rollers and correction devices, starting a new filtration period.

Huzhou Jinghui Environmental Protection Equipment Co., Ltd. insists on providing users with high-quality filtration equipment and comprehensive after-sales service. Our aim is to meet the needs of users to the greatest extent possible. Creating value for users and satisfying them is our unremitting goal. The company adheres to the business philosophy of "Jinghui Filtration, Striving for Excellence" and carefully provides users with high-quality, high-tech, high-performance products and excellent services.