Vortex air pump blower for food machinery

Vortex air pump * High pressure vortex fan * Vacuum high-pressure air pump

Our company's vortex air pump products have a pressure of up to 104 kPa and a negative pressure vacuum of 73 kPa; The casing is made of * degree die cast aluminum, which is the same aluminum material as the wheel hub of Mercedes Benz cars. Compared to ordinary aluminum alloys, die cast aluminum is stronger and has a lighter weight effect compared to iron shell fans. Due to its unique vacuum pumping performance, it has been cited by different mechanical equipment industries; Compared to similar products, the noise of the product is lower. The vacuum high-pressure fan is made of aluminum alloy material, and the overall product focuses more on lightweight, miniaturization, lower product power, and greater energy efficiency. .

Vortex air pump for food machineryAppearance features:
-Compact structure, aluminum alloy die-casting, light weight, excellent craftsmanship, and beautiful appearance.
Wide performance range
-Pressure up to 74kpa
-Vacuum up to 100kpa
-Flow rate: 56m3/min
high reliability
-The structure is simple, with only five main components: machine base, housing, impeller, bearings, and motor,
-Casting aluminum alloy impellers and high-strength shells,
-Sealed bearings to prevent damage from pollutants,
-Double Chen type elastic shaft seal reduces leakage,
-There is only one annular chamber unit to prevent thermal damage,
-Adequate impeller support to prevent blade breakage,
-One side sealing gap reduces the occurrence of faults during high-temperature operation of the blower,
Oil free transportation
-No hydrocarbons carried out, no oil and gas supply air,
-Meet the requirements of healthcare and scientific applications,
Low noise and low temperature rise
-The single vortex single-sided suction impeller design has lower noise and lower temperature rise compared to the paddle wheel I design,
-*The circular design keeps the airflow in a stable laminar state with low airflow noise,
-Aluminum alloy shell with good heat dissipation performance.

Vortex air pump for food machineryThere are three-phase 380V and three-phase 220V voltages, single-phase 220V voltage, and the difference between single-phase and three-phase:
Single phase is 220 volts voltage. The voltage between the phase line and the neutral line. The two phases are a and b or c of the phase line, and the phase voltage between them is 380. A common electrical appliance is a 380 motor.
Two phase electricity is generally 220 volts and has two wires, one of which is the live wire and the other is the neutral wire. The 220 volt electricity is used for civilian or small mechanical purposes
Three phase electricity can provide a more reasonable power source. As an energy source for electric motors, nothing else is needed. As long as the three-phase electricity is directly connected to the motor, the motor can operate. If it is a unidirectional motor, a complex device needs to be added to the motor to ensure its operation.
There is a difference. Three phase electricity at 380 volts. Single phase electricity at 220 volts. The so-called three-phase electricity refers to three-phase live wires, with a voltage of 380V between adjacent live wires and no neutral wire Therefore, only when the three-phase load is the same (such as a three-phase motor), can three-phase electricity be applied. At this time, since the sum of the current vectors of three-phase electricity is 0 (which forms a 120 degree angle with each other, the sum is 0), there is no need for a neutral line (equivalent to a neutral line)

Vortex air pumpFeatures:
1. Due to the frictionless operation of the impeller within the body, no lubrication is required, resulting in the exhaust gas being oil-free. It is an ideal pneumatic conveying gas source for industries such as chemical and food.
2. It is a volumetric blower. When in use, the flow rate changes very little with changes in pressure. But the flow rate varies with the rotational speed. Therefore, the range of pressure selection is wide, and the choice of flow rate can be achieved by selecting the desired speed.
3. High speed results in small gaps between rotors and between rotors and the body, leading to less leakage and higher volumetric efficiency.
4. The structure of the vortex air pump determines that its mechanical friction loss is very small. Because only the bearings and gear pairs have mechanical contact in material selection, the rotor, housing, and gear ring have sufficient mechanical strength. Safe operation and long service life are the characteristics of blower products.
5. The rotor of the vortex air pump has undergone static and dynamic balance verification. The finished product runs smoothly with minimal vibration.

Shanghai Industrial Co., Ltd., a high-quality manufacturer of vortex air pumps, relies on years of manufacturing experience, strict quality control, and precise adherence to equipment and CAD design systems and production lines. We pay attention to absorbing and integrating technology, and use all parts to achieve high quality requirements. At the same time, to ensure the performance of the vortex air pump, every fan must undergo strict testing before leaving the factory, and the product is highly favored by many customers around the world.

Vortex air pump * High pressure vortex fan * Vacuum high-pressure air pump