Wannan Electric Motor YE3 Series Ultra High Efficiency Three Phase Asynchronous Motor

The YE3 series motor is an efficient and energy-saving motor derived from the Y2 series motor. The efficiency of the entire series of motors is higher than that of ordinary Y2 series motors. Its appearance is beautiful, efficient, and energy-saving. The insulation level is F level, and the protection level is IP54 or IP55. The motor has low noise and vibration, and reliable operation.

Usage conditions:

【 Power supply conditions 】 Voltage fluctuation within ± 5% (short-term allowable fluctuation ± 10%); Frequency fluctuation within ± 2% (short-term allowable fluctuation within ± 5%). The motor and frequency fluctuate within ± 5% simultaneously, and the frequency fluctuation does not exceed ± 2%.

[Place of use] shall not be used in environments containing flammable gases, chemically corrosive gases, or other harmful gases (except for motors used in special environments).

The environmental temperature varies with the seasons, but the highest does not exceed+40 ℃ and the lowest is not less than -15 ℃ (except for special ambient temperature motors)

Altitude: not exceeding 1000m (excluding high-altitude motors)

【 Transmission Method 】 Flexible couplings, spur gears, and pulleys are allowed for transmission

Clockwise (default), counterclockwise (order to be specified)

[Start up method] Direct start, Y/△ start, voltage reduction start, frequency conversion start, etc.

1. Suitable for general places and machinery without special requirements, such as metal cutting machines, pumps, fans, transportation machinery, mixers, agricultural machinery, food machinery, etc.

2. The efficiency of this series of motors meets the second level energy efficiency standard of GB18613-2012 "Energy Efficiency Limits and Grades for Small and Medium sized Electric Motors". Compared with the corresponding specifications of YX3 series, the efficiency has increased by an average of 2% -3%; Compared with the corresponding specifications of the ordinary Y2 series, the efficiency is increased by an average of about 10%; And it has relatively flat efficiency characteristics within the load range of 50-100%.

3. The installation size and power level fully comply with IEC standards and DIN42673 standards, and the cooling method is IC411

4. Protection level IP55, cast iron shell dustproof and splash proof, optimized structure, in compliance with international standards, ensuring safe operation

5. Adopting F-grade insulation, it has high heat resistance, strong impact resistance, long insulation life, and can withstand harsh environments

6. Using well-known brand bearings, silicon steel sheets, and enameled round copper wires, the performance is guaranteed

7. Standardized design, high-quality raw materials, advanced processing equipment, and a comprehensive quality assurance system result in significant energy-saving effects, minimal vibration, low noise, stable performance, and safety and reliability.

This series of motors has obtained China Energy saving Product Certification, China Compulsory Certification (CCC), and EU CE Safety Certification. The products have been selected for the fifth and sixth batches of the Ministry of Finance and the National Development and Reform Commission's "Catalogue of Enterprises Promoting Energy saving, Benefiting the People and Efficient Motors", and enjoy subsidies from the National Energy saving and Benefiting the People Project. At the same time, the product has obtained the first batch of "low-carbon product certification certificates" in China and was selected for the "Recommended Catalogue of Energy saving Mechanical and Electrical Equipment (Products) (Fifth Batch)" by the Ministry of Industry and Information Technology at the end of 2014.

Enquiries and more information can be added to the official account: window of the motor or scan the QR code below