Water Quality Analyzer Shallow Water H2 Sensor

NegotiableUpdate on 03/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The shallow water H2 sensor of the water quality analyzer is mainly used for on-site dissolved hydrogen analysis within 100 meters. Due to the partial pressure of gaseous H2, the analyte is separated through membrane permeation principle. Inside the sensor, hydrogen undergoes an electrochemical reaction on the working electrode, generating a current corresponding to the partial pressure of dissolved hydrogen. The response time of the $r $n sensor is very short, with a response time of about 2 seconds to reach t90%. It can achieve very high-resolution local profile analysis, and turbid and colored solutions will not interfere with the signal. To measure hydrogen concentration, the sensor must be used in conjunction with temperature measurement.

Product Details

Water Quality Analyzer Shallow Water H2 SensorMainly used for on-site dissolved hydrogen analysis of dissolved hydrogen within 100 meters. Due to the partial pressure of gaseous H2, the analyte is separated through membrane permeation principle. Inside the sensor, hydrogen undergoes an electrochemical reaction on the working electrode, generating a current corresponding to the partial pressure of dissolved hydrogen.

The response time of this sensor is very short, with a response time of about 2 seconds to reach t90%. It can achieve very high-resolution local profile analysis, and turbid and colored solutions will not interfere with the signal. To measure hydrogen concentration, the sensor must be used in conjunction with temperature measurement. The sensor carries sensor slope, temperature compensation data, and mathematical formulas for calculating hydrogen concentration inside, and automatically compensates upon receiving temperature data. The replacement of sensors is also very simple, and users can complete it themselves. The replaceable probe further enhances the flexibility of the sensor.

Product Features:

German craftsmanship

Facilitating system integration. Measurement range, voltage adaptation range, and signal output form can all be customized

Quick measurement, response time of about 2 seconds

Technical Specifications:

Measurement principle: Current type film covered microsensor

Power supply: 9-30 VDC

Output: 0-+3 VDC (other customizable)

Size: Diameter: 24mm, Length: 235mm

Connector: SUBCONN BH-4-MP (other customizable)

Shell: Titanium

Measurement range: 0.0002-1 mg/l (other customizable)