Water Tank Disinfection Machine - Water Tank Self Cleaning Disinfector

NegotiableUpdate on 04/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The micro electrolysis water treatment machine for water tank disinfection is a new generation of high-efficiency water treatment equipment developed by our R&D department through continuous experiments, based on our company's reference and research on disinfection technologies for water tanks and pools in various countries, in response to the common problems of bacterial and algal growth and serious secondary pollution of water quality in water tanks and pools.

Product Details

Xinnuo Environmental Protection Equipment Co., Ltd

The water tank self-cleaning and disinfecting device LBXD utilizes the principle of microelectrolysis electrochemical reaction to generate strong oxidizing substances from dissolved chloride ions and water molecules in water, achieving the effects of purifying, disinfecting, sterilizing, and killing algae in water bodies. The equipment consists of three parts: a circulation pump, an energy release device (micro electrolytic cell), a controller, and an energy transmission cable. It can be divided into external and internal types according to the installation position.

Water tank disinfection machine

The working principle of the micro electrolysis water treatment machine is to first place the circulating water tank of the self-cleaning and disinfecting device in the middle and lower part of the water tank to ensure uniform water circulation in the water tank. When the water level reaches the high water level set by the level gauge, the electric control cabinet starts to start the high-voltage power supply and the strong oxidizing gas generated by the submersible pump through the pipeline to the aeration section; Aeration disinfection is carried out on the water, and at the same time, the submersible pump sends the disinfected water back to the water tank, allowing the stagnant water to circulate. This cycle continues to disinfect the water and ensure its quality. This product has already set the time before leaving the factory, and users do not need to set it again.

SCII-20H-PLC-B-Z Micro electrolysis Water Treatment Machine Manufacturer

Principle of micro electrolysis water treatment machine: Its working principle is that oxygen (or air) is converted into ozone through a high-frequency and high-voltage electric field, and mixed with water in a timely manner, using the strong oxidation effect of ozone to kill bacteria in water. The ideal concentration for killing bacteria can be achieved by adjusting the inlet pressure, air volume, current, and other factors.

Due to the oxidation-reduction potential of ozone in water being 2.07v, which is higher than chlorine (1.36v), when the amount of ozone is only one ten thousandth of chlorine, the sterilization effect is 600-3000 times faster than chlorine and other agents, and can kill bacteria within seconds.

Introduction to Micro electrolysis Water Treatment Machine Models: Depending on the size of the water tank, the commonly used models for self-cleaning and disinfecting water tanks are SCII-5HB, SCII-10HB, SCII-20HB, etc.