-
E-mail
web@yxtl.com.cn
-
Phone
13812210112
-
Address
Gaocheng Town Industrial Zone, Yixing City
Product Categories
Wuxi Junli Environmental Protection Equipment Co., Ltd
Water jet, WNP jet
NegotiableUpdate on 02/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product Introduction: The water injector is the fundamental source of negative pressure in the entire chlorination system, and it is also the key point for adding chlorine gas after combining with water. The performance of the water injector directly affects the stability of the system operation
Product Details
Product Introduction:
The water injector is the fundamental source of negative pressure in the entire chlorination system, and it is also the key point for adding chlorine gas after combining with water. The performance of the water injector directly affects the stability of the system operation.
Technical parameters:
specifications (Outer diameter) |
dosage (liters per second) |
Inlet pressure (megapascal) |
Jet water flow rate (liters/second) |
Solution inhalation pressure (megapascals) |
Solution lifting internet traffic (liters per second) |
Mixed liquid output Pressure (megapascals) |
Mixed liquid flow rate (liters/second) |
Orifice ratio (R) |
25 |
0.05 |
0.25 |
0.114 |
0 |
0.05 |
0.10 |
0.164 |
0.46 |
32 |
0.10 |
0.227 |
0 |
0.10 |
0.327 |
0.46 |
||
40 |
0.20 |
0.455 |
0 |
0.20 |
0.655 |
0.46 |
||
50 |
0.50 |
0.528 |
0 |
0.528 |
0.05 |
1.056 |
0.23 |
Dimensions (millimeters)
| Specification (outer diameter) | Dosage (liters per second) | Total length (mm) | Outer diameter of dosing port (mm) |
| 25 | 0.05 | 170 | 20 |
| 32 | 0.10 | 195 | 20 |
| 40 | 0.20 | 245 | 25 |
| 50 | 0.50 | 350 | 25 |
injector
An injector is a small device used for transporting and diluting medicinal liquids in water treatment systems such as thermoelectric, refining, pharmaceutical, and environmental protection. It has the advantages of reasonable design, compact structure, easy operation, good mixing effect of medicinal liquids, and long service life.
The WNP injector is made of materials such as fiberglass, stainless steel, alkali steel, polyvinyl chloride, polytetrafluoroethylene, etc. Users can choose according to the corrosion situation of the liquid medicine transported by our factory or make it according to their drawings.
Adjust the thickness of the pesticide liquid inlet valve and "adjusting gasket" to achieve the desired concentration of the exported liquid.
