Weifang supply of pressure type integrated water purifier

Weifang supply of pressure type integrated water purifierThe working principle mainly includes the following four steps:

Coagulation: By adding coagulants, suspended solids and colloidal particles in water aggregate into larger clumps, forming flocs and reducing clogging problems during subsequent filtration processes.

Sedimentation: The water after coagulation enters the sedimentation zone, where the flocculants settle to the bottom by gravity, and the sediment is regularly discharged through an automatic sludge discharge device.

Filtration: After sedimentation, the water enters the filtration zone and is further removed of suspended solids, organic matter, and other impurities through the physical action of multiple layers of filter media (such as quartz sand, activated carbon, etc.). The top of the filtration area is equipped with an automatic backwash device, which regularly backwashs the filter material to restore its activity.

Sterilization and disinfection: The filtered water enters the sterilization and disinfection area, where bacteria, viruses, and other microorganisms in the water are killed by UV, ozone, or chlorine, ensuring the hygiene and safety of the effluent.

Weifang supply of pressure type integrated water purifierPrecautions for use

Inlet water quality control: Avoid raw water containing large amounts of oil stains, corrosive substances, or highly toxic pollutants to prevent equipment damage or affect the effluent quality.

Regular maintenance: Check the condition of the filter material according to the instructions and replace the aging filter layer in a timely manner; Clean the sediment inside the equipment to prevent blockage.

Pharmaceutical management: coagulants and disinfectants should be added in proportion to avoid excessive secondary pollution or insufficient purification effect.

Antifreeze measures: When not in use in winter, the accumulated water in the equipment should be drained to prevent pipeline freezing and cracking.

Safe operation: Cut off the power and water sources before maintenance, and wear protective equipment; Non professionals are not allowed to disassemble core components without authorization.

Compatibility check: If used in conjunction with reverse osmosis, ultrafiltration and other equipment, it is necessary to ensure that the pre-treatment and post-treatment processes are matched to avoid water quality conflicts.