Nanjing Kaijite Electric Wireless Sensor
Wireless switch receiver
1、 Main technical parameters of the product
Product Name:KNW100C3R1P4
Product function: Receive data from the transmitter, display it on the LCD screen, and drive the alarm device to sound an alarm
2、 Product execution standards:
3、 Installation and connection
1. 3.1Outline and Dimensional Drawing
3.4 wiring
Press the wiring button next to the wiring hole when wiring,Insert the corresponding lines according to the interface diagram,Then release the wiring button.
3.5 Antenna Installation
(Please install the antenna before starting up) Remove the antenna from the box and screw it directly onto the antenna interface above. The direction of the antenna can be adjusted by yourself.
3.6 Master slave pairing
This product is paired and tested successfully by default when it leaves the factory. If it is connected to a new transmitter, it needs to be paired and used first.
Pairing method: After powering on the receiver and transmitter, press the pairing button on the transmitter. Within ten seconds, press the pairing button on the receiver. If the pairing button on the receiver is not pressed for more than ten seconds, the pairing request will be considered invalid and re paired. After pairing is completed, the transmitter's address and battery level will be displayed on the receiver's screen, indicating successful pairing and joining the network.
Nanjing Kaijite Electric Wireless Sensor
