Wood activated carbon strength tester

NegotiableUpdate on 04/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The wooden activated carbon strength tester is suitable for most granular activated carbon and is not suitable for the catalytic carrier activated carbon used in the synthesis of vinyl acetate. Both water purification plants and activated carbon production workshops can be used.

Product Details

Wood activated carbon strength testerPrinciple:

The sample undergoes certain mechanical wear in the instrument, and both the skeleton and surface of the sample are damaged. After screening, the percentage of retained particles is calculated as the strength of the sample.

Wood activated carbon strength testerParameters and equipment compatibility:

1. Sample sieve: Take the smallest sieve number specified for the activated carbon of this variety.

2. Vibration screening machine: The vibration frequency is about 221 times/min, and the vibration frequency is about 147 times/min.

3. Stopwatch.

4. Strength tester parameters:

a) Steel drum speed (50 ± 2) r/min

b) Steel ball diameter (14.3 ± 0.2) mm, 10 pieces.

c) No.1 steel cylinder: inner diameter 80mm, effective length 120mm, wall thickness 3mm.

d) No.2 steel cylinder: inner diameter 80mm, effective length 120mm, wall thickness 3mm. There are two longitudinal bars at a 180 ° symmetrical position inside, with a height of 10mm, width of 4mm, and length of 120mm.

5. Balance: Sensitivity of 0.1g.