XBD-W horizontal fire pump

NegotiableUpdate on 03/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

XBD-W horizontal fire pump

Product Details

XBD-W horizontal fire pump

1、 XBD-W Horizontal Fire Pump Product Overview:

XBD-W type vertical single-stage single suction fire pumpIt is used for conveying clean water without solid particles and liquids with physical and chemical properties similar to water. It is mainly used for boosting water supply in fire protection systems and can also be applied to factory and mine water supply and drainage. Its performance and technical conditions comply with the newly issued national standard GB6245-1998《Fire pumpAccording to the requirements of the "Performance Requirements and Test Methods" standard, the product has been tested and qualified by the National Fire Equipment Quality Supervision and Testing Center, and has obtained the Shanghai Fire Product Accreditation Certificate.

2、 XBD-W horizontal fire pump product features:

1. Compact structure, beautiful appearance, smooth operation, low noise, high concentricity of components.

2. The shaft seal adopts high-quality mechanical seal, which has the characteristics of wear resistance, no leakage, and long service life.

3、 XBD-W horizontal fire pump model meaning:

XBD 3.2/5- 65 W- 160A

XBD –Fire pumpGroup code

3.2- Design pressure (1/10MPa)

5- Design flow rate (L/S)

65- Import and export diameter (mm)

W - The structure is horizontal

160- nominal diameter of impeller (mm)

A - The impeller is cut for the first time

4、 Technical parameters of XBD-W horizontal fire pump:

Flow rate: 5-100L/S;

Pressure: 0.10-1.25Mpa;

Power: 1.1-250KW;

Speed: 980-2900r/min;

Caliber: 50-300mm;

Temperature range: ≤ 120 ℃.

_________________________________________________________________

Tip 1: All fire pumps use stainless steel shafts and aluminum bronze impellers (according to national fire safety acceptance standards). If there are different material requirements, please specify them separately when ordering.

Tip 2: Fire pumps should be started at least once every six months to prevent rusting caused by long-term disuse or poor maintenance, which can make it difficult to start again.