XDG3253Y speed impactor monitoring device for precise monitoring

Technical Specifications
Power supply: 220VAC ± 10% 50HZ
Input signal:
Speed measurement signal: ZS-1 reluctance speed sensor signal amplitude is 50mV-20V (RMS) frequency response is 0.5-15kHz
Signal of impactor 1: ZS-1 magneto resistive speed sensor or integrated eddy current sensor
Signal of impactor 2: ZS-1 magneto resistive speed sensor or integrated eddy current sensor
Parameter settings:
Number of teeth: 1-120 (set to 60 at the factory);
Alarm value: Level 2 alarm, set alarm value I to 3300rpm and alarm value II to 3360rpm respectively when leaving the factory;
Alarm delay: At the factory, it can be set to 1-6 seconds according to user requirements, usually 1 second. Measurement display:
Display mode: Four digit 0.8-inch LED digital display
Range: 1~9999rpm
Display accuracy: ± 1rpm
Measurement output:
Current quantity: 4-20mA current proportional to the speed value, accuracy ± 1%, load ≤ 500 Ω
Switching quantity: Four normally open contacts of the output alarm I, II, and the impact sub 1 #, 2 # relays are closed when an event occurs, with a contact capacity of 2A/250V AC or 1A/28V DC
Warning signal: The panel is equipped with alarm I, II and collision sub 1 #, 2 # indicator lights. When an event occurs, the corresponding indicator lights will light up.
Environmental Requirements
Environmental temperature: During operation: 0 ℃~65 ℃
Storage time: -30~80 ℃
Relative humidity: up to 95%, non condensing, non corrosive, and non strong magnetic field
Dimensions: 160 × 80 × 200mm
Hole size: 152+1X76+1mm
Weight: Approximately 836g XDG3253Y Speed Impact Sub Monitoring Device Accurate Monitoring This product is an intelligent instrument that integrates speed monitoring and impact sub action recording. It achieves intelligent operation through a microcomputer, and its main functions include: displaying real-time speed, capturing and storing the highest speed during operation; When the emergency governor collides with the sub action, it automatically remembers the speed at which it "hits" and "retracts". Users can cyclically display these stored speed values through simple panel operations. Overview
Speed is an important operating monitoring parameter for steam turbine units. When the unit speed reaches 110% of the rated speed, the steam turbine should be shut down urgently. To achieve this goal, the unit security system is equipped with an emergency governor in the front bearing box of the steam turbine. The emergency governor impactor is "ejected" by the centrifugal force generated at 110% of the rated speed, which can cause the steam turbine to shut down urgently.
Before the new unit is put into operation or the unit is connected to the grid for each major overhaul, the speed of the impactor action must be measured. To prevent jamming of the impact nozzle, the manufacturer stipulates that the unit should undergo an impact nozzle fuel injection activity test after continuous operation for 2036 hours. However, the installation location of the emergency governor cannot observe the "striking" and "retracting" states of its impactor, nor can it determine the rotational speed when the impactor acts.
The intelligent tachometer/impactor monitoring device adopts microcomputer intelligent technology to solve the problems of speed monitoring and impactor monitoring. It usually displays the turbine speed and captures and records the "highest" speed of the unit. When the emergency governor impactor "hits" or "retracts", the internal memory function stores the speed at the time of "hitting" or "retracting" in the instrument. By pressing the "Settings" button on the panel, the speed at the time of "highest", "hitting" or "retracting" can be easily displayed in the display window. XDG3253Y Speed Impactor Monitoring Device Accurate Monitoring XDG3253Y Speed Impactor Monitoring Device Accurate Monitoring