Y3150K gear hobbing machine

NegotiableUpdate on 04/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Main technical parameters: 1. Processing range: ① Maximum processing diameter of 500mm ② Maximum processing module of 8mm ③ Maximum processing width of 250mm ④ Minimum number of teeth on the workpiece: 6 teeth. 2. Tool holder: ① Maximum rotation angle of the tool holder: 240 ② Maximum vertical stroke of the tool holder: 300mm ③ Minimum reading of the tool holder rotation angle: 6 ④ Rapid vertical movement speed of the tool holder: 0

Product Details

Main technical parameters
1. Processing scope
①最大加工直径 500mm
② Maximum processing module 8mm
③ Maximum processing width 250mm
④ The minimum number of teeth on the workpiece is 6 teeth
2. Knife holder
① Maximum rotation angle of knife holder: 240 °
② Maximum vertical travel of knife holder: 300mm
③ Minimum reading of tool holder rotation angle: 6 '
④ Vertical rapid movement speed of tool holder: 0.52 m/min
⑤ Vertical manual movement of knife holder per rotation: 0.754mm
⑥ Vertical feed rate level: 12 levels
⑦ Vertical feed range: 0.4~4mm/worktable per revolution
3. Workbench
① Workbench diameter: 510mm
② Workbench hole diameter: 80mm
③ Horizontal manual movement of workbench per revolution: 1mm
④ Minimum horizontal movement reading of workbench: 0.01mm
⑤ Horizontal hydraulic drive of workbench: 50mm
⑥ Maximum distance from workbench to small column sliding seat bearing end: 850mm
⑦ Minimum distance from workbench to small column sliding seat bearing end: 380mm
4. Roll cutter spindle
① Maximum allowable roller diameter for installation: 160mm
② Maximum allowable roller length for Lou installation: 160mm
③ Thread diameter of tool pull rod: M16
④ Spindle hole taper: Mohs 5
⑤ Maximum axial movement of the rolling cutter: 55mm
⑥ The maximum distance between the center of the rolling cutter spindle and the worktable is 535mm
Minimum: 235mm
⑦ The maximum distance between the axis of the workpiece and the axis of the rolling cutter is 330mm
Minimum: 20mm
⑧ Spindle speed range: 40~250rpm
⑨ Spindle speed level: 9 levels
5. Electric motor and weight
① Main motor power/rated speed 5.5kw/1440rpm
② Axial (vertical) fast motor power/rated speed 0.75kw/1380rpm
③ Radial fast motor power/rated speed 0.75kw/1380rpm
④ Hydraulic pump motor power/rated speed 1.1kw/1000rpm
⑤ Net weight/gross weight of machine tool: 4500kg/5300kg
⑥ Machine tool outline dimensions (length x width x height) 2450x1272x1790mm
6. Other
① Core shaft diameter of rolling cutter: 22mm, 27mm, 32mm
② Core shaft diameter of workpiece: 30mm