YongLong insulation jacket bottom valve

YongLong insulation jacket bottom valve

Model: FDQL41MOC-16R

Alternative names: Tank Bottom Valve, Bottom Ball Valve, Diagonal Rod Bottom Valve, Bottom Discharge Valve, Insulated Bottom Valve, Jacketed Bottom Valve

Introduction to Bottom Valve:

The YongLong inclined rod bottom valve is used for discharging materials from reaction vessels, pressure vessels, and storage tanks in clean industries such as pharmaceuticals, biology, fine chemicals, food and beverage, and dairy products. The bottom valve has the advantages of no leakage of discharged materials and good sealing performance. When using a mixer, the bottom material of the container can fully rotate with the water flow when the mixer is turned on to stir the material evenly. The spherical shape is curved, and when the valve is closed, the spherical shape is consistent with the curved flange at the connecting end, forming a * to avoid material residue.

Application of inclined rod jacket bottom valve:

The insulation jacket bottom valve is a metal jacket welded on the basis of the bottom valve, used for injecting thermal oil, steam or other insulation and cooling media to ensure that the media inside the valve can work normally. The bottom valve of the insulation kettle has good insulation and cooling characteristics, which can effectively reduce the heat loss of the medium in the pipeline. The jacket bottom valve is mainly used to transport high viscosity media that will solidify at room temperature.

Image of inclined rod jacket insulation kettle bottom valve - Shanghai Yonglong Valve Factory

Technical features of inclined rod insulation kettle bottom valve:

1. Diagonal valve stem: The platform and valve body are inclined at a 105 ° angle to avoid interference between the actuator and the tank bottom.

2. Platform: ISO5211 standard connection, can directly install brake actuators.

3. Curved flange: The curved welded flange and valve body form a three piece structure, which is easy to install and maintain.

4. Sphere: When the sphere is closed at 90 °, it is connected to the curved flange to reduce material accumulation.

5. Precision machining of the valve body cavity ensures smooth material flow.

6. The cover is equipped with an adjusting bolt, which can adjust the valve stem packing seal.

Application of inclined rod jacket bottom valve:

The insulation jacket bottom valve is a metal jacket welded on the basis of the bottom valve, used for injecting thermal oil, steam or other insulation and cooling media to ensure that the media inside the valve can work normally. The bottom valve of the insulation kettle has good insulation and cooling characteristics, which can effectively reduce the heat loss of the medium in the pipeline. The jacket bottom valve is mainly used to transport high viscosity media that will solidify at room temperature.

Structural diagram of inclined rod insulation jacket bottom valve - Shanghai Yonglong Valve Factory

Installation steps for insulation jacket bottom valve:

1. Now confirm the size of the connection between the curved flange and the tank bottom. After confirming that the size * matches, weld the curved flange to the tank bottom.

2. Rotate the connecting bolts onto the curved flange.

3. Insert the seal into the groove of the valve cover surface.

4. After selecting the correct position for the valve drive, align the flange bolt holes with the bolts and insert them.

5. Ensure that the outer circle of the curved flange is aligned with the outer circle of the valve cover, and tighten the corresponding nut to ensure that the flange is flush with the valve cover, completing the installation.

6. Connect the insulation pipe to the jacket interface.

YongLong insulation jacket bottom valveRelated products: Bottom ball valve - Diagonal rod bottom ball valve - Bottom discharge ball valve - Pneumatic bottom ball valve - Diagonal rod insulation bottom ball valve