ZNGL02011301 hydraulic oil filter element

ZNGL02011301 hydraulic oil filter elementIt is an industrial oil matching filter element mainly used in closed circuit hydraulic systems to filter out pollutants such as metal particles and seal impurities in the oil, thereby keeping the oil clean and extending the service life of hydraulic pumps and other components

Filtration accuracy: 34 micrometers (μ m), capable of effectively removing tiny particles from liquids

ZNGL02011301 hydraulic oil filter elementIt has the characteristics of efficient filtration, easy installation, and strong durability. Its design can prevent pollutants from re entering the fuel tank during replacement, improving the reliability of the system

It is widely used in hydraulic systems of power plants, steel mills, mechanical manufacturing and other industries, such as lubrication stations, oil filters and other equipment

Regularly check the pressure difference of the filter element, and replace it promptly when the pressure difference reaches 0.35MPa to avoid system overload. ‌‌

When replacing the filter element, it is necessary to ensure that the system is shut down and the connection is strictly sealed to prevent leakage

Hydraulic oil filter cartridges are commonly used in power plants, and imported composite fiberglass is widely used to ensure filtration accuracy, improve the service life of the filter cartridge, increase the filtration area of the filter cartridge, and increase the pollutant holding capacity of the filter cartridge

The filter element is different from the ordinary mesh component structure, and adopts a folding wave folding process, which can increase the filtering area of the filter element and increase the pollutant holding capacity of the filter element. The mesh structure has a small pollutant carrying capacity, poor filtration effect, and a cumbersome and time-consuming replacement process, which affects the operational efficiency of the enterprise. It can facilitate user operation. When the filter element needs to be replaced, simply remove the filter element from the filter and install a new one.

1. Regularly monitor the hydraulic system's fault conditions, especially the working pressure and the operating speed of the actuator.

Before starting the hydraulic system, check whether the solenoid valves and all motion prices are in their original state, and whether the oil level in the tank is normal.

3. The operator is not allowed to damage the interlocking device of the electrical system and is not allowed to manually push the electric control valve.

When there is a malfunction in the hydraulic system, it should be reported immediately to the maintenance department or system manufacturer, and the cause of the malfunction should be analyzed and addressed as soon as possible.

5. Hydraulic equipment should be kept clean regularly to prevent various pollutants from entering the oil tank.