ZQS6-2000A high-precision bonding strength tester

Brief introduction
This product can not only measure the bonding strength of exterior wall finishes, but also the bonding strength of exterior wall insulation materials, paints, and coatings. It uses the latest developed SW-4B intelligent digital peak holding meter, which can measure a minimum force value of 0.001kN, fully meeting the testing needs of various bonding strengths. This intelligent digital meter has peak holding, storage, and query functions.
2、 Product Features
1. High precision: The minimum measurable force value is 0.001kN;
2. High efficiency: Compared with traditional pressurization methods, the pressurization speed of this product can be increased by nearly 10 times, completely reducing detection fatigue caused by improper pressurization structure;
3. Using software calibration, there is no need to disassemble the pressure gauge. Simply increase the pressure to the specified value and complete it with just one click, greatly facilitating user calibration and use. It is the latest updated product;
4. High efficiency nickel hydrogen rechargeable batteries are used, which can be reused for a long time.
3、 Basic configuration
1. One host; (including high-precision sensing and detection unit)
2. One SW-4B intelligent digital peak retention meter;
3. One sensor connecting wire;
4. Two groups of three standard blocks each (95mm × 45mm/40mm × 40mm)
5. One manual;
6. One set of industry standards and specifications;
7. One aluminum alloy packaging box;
8. One charger
9. One certificate of conformity and one warranty card each