Hunan High Temperature and High Pressure Cleaning MachineIn our country, there are different names, and most people refer to them as high-pressure water cleaning machines, high-pressure water flow cleaning machines, high-pressure water jet equipment, etc. The Hunan high-temperature and high-pressure cleaning machine uses water as the working medium. Usually, the power driven pump completes a suction and discharge process on the water, converting ordinary water into high-pressure and low-speed water, and then delivering it to the high-pressure pipeline to reach the high-pressure nozzle with a certain amount of energy. The aperture of the high-pressure nozzle is much smaller than the diameter of the high-pressure pipeline, so the water reaching the high-pressure nozzle must accelerate in order to pass through the nozzle. High pressure water jet is the simplest form of energy conversion and application. When the impact force of high-pressure water jet is greater than the adhesion between dirt and the surface of the object, it will peel off and wash away the dirt, achieving a cleaning device for cleaning the surface of the object.

After the Hunan high-temperature and high-pressure cleaning machine is put into operation, how can we evaluate its work efficiency and results? There are generally three inspection methods, and the specific content is as follows:

1. Special inspection of specific dust and dirt on Hunan high-temperature and high-pressure cleaning machines: This method is suitable for degreasing and cleaning typical mechanical components. The focus of the inspection at this moment is onHunan High Temperature and High Pressure Cleaning MachineThere is no need to conduct specific inspections on other types of oily dirt. This inspection method can also verify the cleanliness level of the cleaning target.

2. Using the most severely polluted parts of the Hunan high-temperature and high-pressure cleaning machine as the inspection standard for testing: If the cleanliness level of the most severely polluted parts of the Hunan high-temperature and high-pressure cleaning machine has reached the required level, the Hunan high-temperature and high-pressure cleaning machine can use tap water or cooling water from the refrigeration system as the working medium for cleaning, saving water and energy. It should be noted that when using system cooling water as the cleaning medium, the water filtration process must be done well, and no scale or debris should enter the inlet pipeline of the Hunan high-temperature and high-pressure cleaning machine.

3. Random sampling method for Hunan high temperature and high pressure cleaning machines: This inspection method is suitable for situations where there are many cleaning targets, but due to time constraints, it is not possible to inspect each cleaning target individually. At this time, we usually need to randomly select a single Hunan high temperature and high pressure cleaning machine for inspectionHunan High Temperature and High Pressure Cleaning MachineThe inspection results are used to determine the cleanliness level of all cleaning targets. The use of this method requires attention to selecting a certain number of inspections in order to accurately reflect the overall situation.

Featuring a novel appearance, simple operation, and user-friendly design, it is mainly suitable for cleaning industries such as oil fields, chemicals, mines, airports, railways, electricity, hotels, airplanes, trains, tanks, construction machinery, ports and terminals, containers, farms, textiles, various pipelines, food factories, and automotive beauty

Standard configuration: 8-meter high-pressure hose, 1 set of automatic board machine gun, adjustable nozzle, pressure gauge, pressure regulating valve, bypass valve, 5.5-meter power cable, temperature control switch, diesel boiler and filter screen, diesel tank, cleaning agent tank, protective relay for motor overload.

　　Hunan High Temperature and High Pressure Cleaning MachineFunction configuration: 1. Pure copper pump head, (industrial grade) high-strength crankshaft type three plunger (ceramic) water pump;

2. INTERPUMP51 series crankshaft high-pressure pump;

3. Two pole motor with overload thermal relay, capable of long-term operation (2800 rpm);

4. Cleaning gun controls low-pressure cleaning agent delivery;

5. Using European food industry standards, a 24 meter corrosion-resistant double-layer steel heating coil;

6. Industrial grade seamless stainless steel combustion furnace with a thermal efficiency greater than 89%;

7. Hot and cold water selection switch

Exploring the Current Problems of High Temperature and High Pressure Cleaning Machines in Hunan Province

Hunan high-temperature and high-pressure cleaning machines have gradually been applied in various industries in China, and have made significant progress in recent years. They have gradually been applied and promoted to many enterprises, and the industrialization pattern has taken shape. By comparing the market situation of high-pressure water cleaning at home and abroad, as well as the product situation of major companies at home and abroad, the overall design and complete assembly of equipment for high-pressure products above 100MPa in China have become a reality. However, the main components such as pump units still need to be imported. Currently, high-pressure water jet cleaning technology in China is in the development stage and is not yet mature enough, with the following problems.

(1) The overall configuration is not complete enough.

Many Hunan high-temperature and high-pressure cleaning machine manufacturers provide incomplete types and insufficient quantities of parts, making it difficult for users to choose different gun accessories according to their needs and unable to meet their diverse needs.

(2) The system parameters lack optimized design.

In order to achieve the maximum impact effect and cleaning efficiency, the system requires operation at rated pressure, rated flow rate, and rated power, i.e., rated state. However, in practical work, due to improper use of high-pressure hose specifications, the aperture and orientation of nozzles and spray heads are inconsistent with the main parameters, and the cleaning of scaling objects does not match the main parameters of the cleaning machine. As a result, the entire machine often operates at lower power, wasting its performance.

(3) Quality issues with the high-pressure pump.

The high-pressure pump, as the device for generating high-pressure water jets, is the operational core of Hunan high-temperature and high-pressure cleaning machines. Therefore, the quality of the high-pressure pump is directly related to the excellent performance of the entire machine. In practical work, common issues with high-pressure pumps, such as poor wear resistance of moving parts and abnormal damage to high-pressure hoses, can have a negative impact on the overall efficiency of the machine.

(4) Spray gun issue.

Lack of performance, lifespan, and variety of spray guns, which affectsHunan High Temperature and High Pressure Cleaning MachineWork efficiency.